Lexmark M5163dn User Manual Download

Page: 12 / 253

Use the

Back button

Return to the previous screen.

Home button

Go to the home screen.

Indicator light

Check the status of the printer.

USB port

Connect a flash drive to the printer.

Note:

Only the front USB port supports flash drives.

Understanding the colors of the Sleep button and indicator
lights

The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition.

Indicator light

Printer status

Off

The printer is off or in Hibernate mode.

Blinking green

The printer is warming up, processing data, or printing.

Solid green

The printer is on, but idle.

Blinking red

The printer requires user intervention.

Sleep button light

Printer status

Off

The printer is off, idle or in Ready state.

Solid amber

The printer is in Sleep mode.

Blinking amber

The printer is entering or waking from Hibernate mode.

Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in a slow,
pulsing pattern

The printer is in Hibernate mode.

Learning about the printer

Summary of Contents for M5163dn






























































































































































































































































Search results

Summary of Contents for M5163dn

Reviews:

Related manuals for M5163dn

Brands by name

Popular brands

Lexmark M5163dn, User Manual

Search results

Summary of Contents for M5163dn

Reviews:

Related manuals for M5163dn

Brands by name

Popular brands