Lexmark M5163dn User Manual Download

Page: 118 / 253

Use

Duplex Binding

Long Edge
Short Edge

Define the way duplexed pages are bound and printed.

Notes:

•

Long Edge assumes binding along the long edge of the page (left edge for
portrait and top edge for landscape). This is the factory default setting.

•

Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).

Paper Saver Orientation

Auto
Landscape
Portrait

Specify the orientation of a multiple

‑

page document.

Notes:

•

Auto is the factory default setting.

•

This setting affects jobs if the value of the Paper Saver setting in the same
menu is not set to Off.

Paper Saver

Off
2

‑

Specify that multiple

‑

page images be printed on one side of a paper.

Notes:

•

Off is the factory default setting.

•

The number selected is the number of page images that will print per side.

Paper Saver Border

None
Solid

Print a border on each page image when using N

‑

Up (pages per side).

Notes:

•

None is the factory default setting.

•

This setting affects jobs if the value of the Paper Saver setting in the same
menu is not set to Off.

Paper Saver Ordering

Horizontal
Reverse Horizontal
Reverse Vertical
Vertical

Specify the positioning of multiple

‑

page images when using N

‑

Up (pages per side).

Notes:

•

Horizontal is the factory default setting.

•

Positioning depends on the number of page images and whether they are in
portrait or landscape orientation.

•

This setting affects jobs if the value of the Paper Saver setting in the same
menu is not set to Off.

Understanding the printer menus

118

Summary of Contents for M5163dn






























































































































































































































































Search results

Summary of Contents for M5163dn

Reviews:

Related manuals for M5163dn

Brands by name

Popular brands

Lexmark M5163dn, User Manual

Search results

Summary of Contents for M5163dn

Reviews:

Related manuals for M5163dn

Brands by name

Popular brands