Lexmark M5163dn User Manual Download

Page: 112 / 253

Use

Time Format

12 hour A.M./P.M.
24 hour clock

Format the printer time.

Note:

This menu appears only in touch

‑

screen printer models.

Screen Brightness

20–100

Specify the brightness of the display.

Notes:

•

This menu appears only in touch

‑

screen printer models.

•

100 is the factory default setting.

Output Lighting

Normal/Standby Mode

Off
Dim
Bright

Set the amount of light from the bin.

Notes:

•

If Eco-Mode is set to Energy or Energy/Paper, then the
factory default setting is Dim.

•

If Eco-Mode is set to Off or set to Paper, then the factory
default setting is Bright.

•

This menu appears only when an indicator light is installed
on the bin or when an optional bin with an indicator light is
added.

Audio Feedback

Button Feedback

On
Off

Volume

1–10

Specify whether icons and buttons have audio feedback.

Notes:

•

This menu appears only in touch

‑

screen printer models.

•

On is the factory default setting for Button Feedback.

•

5 is the factory default setting for Volume.

Show Bookmarks

Yes
No

Specify whether bookmarks are displayed from the Held Jobs area.

Notes:

•

This menu appears only in touch

‑

screen printer models.

•

Yes is the factory default setting. When Yes is selected,
bookmarks appear in the Held Jobs area.

Web Page Refresh Rate

30–300

Specify the number of seconds between Embedded Web Server
refreshes.

Notes:

•

This menu appears only in touch

‑

screen printer models.

•

120 is the factory default setting.

Contact Name

Specify a contact name for the printer.

Notes:

•

This menu appears only in touch

‑

screen printer models.

•

The contact name will be stored on the Embedded Web
Server.

Understanding the printer menus

112

Summary of Contents for M5163dn






























































































































































































































































Search results

Summary of Contents for M5163dn

Reviews:

Related manuals for M5163dn

Brands by name

Popular brands

Lexmark M5163dn, User Manual

Search results

Summary of Contents for M5163dn

Reviews:

Related manuals for M5163dn

Brands by name

Popular brands