Epson LQ-2090 Reference Manual Download Page 1 | Manualshive

Page: 1 / 248

background image

24-pin Dot Matrix Printer

All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of Seiko Epson Corporation.
The information contained herein is designed only for use with this Epson printer. Epson is
not responsible for any use of this information as applied to other printers.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this
product or third parties for damages, losses, costs, or expenses incurred by the purchaser or
third parties as a result of: accident, misuse, or abuse of this product or unauthorized
modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly
comply with Seiko Epson Corporation’s operating and maintenance instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the
use of any options or any consumable products other than those designated as Original Epson
Products or Epson Approved Products by Seiko Epson Corporation.

EPSON and EPSON ESC/P are registered trademarks of Seiko Epson Corporation.

Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

IBM is a registered trademark of International Business Machines Corporation.

General Notice:

Other product names used herein are for identification purposes only and may be

trademarks of their respective owners. Epson disclaims any and all rights in those marks.

Copyright © 2003 by Seiko Epson Corporation, Nagano, Japan.

®

Reference Guide

1
2
3
...
»

Summary of Contents for LQ-2090

























































































































































































































































Reviews:

No comments

Related manuals for LQ-2090

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 858

Brand: Qilive Pages: 398

Brand: Konica Minolta Pages: 266

Brand: CraftBot Pages: 9

Brand: Lexmark Pages: 11

Brand: Maxim Pages: 69

Brand: Xerox Pages: 288

Brand: SPRT Pages: 13

Brand: Sindoh Pages: 142

Brand: Rapid Shape Pages: 44

Brand: Linux Pages: 8

Brand: Oki Pages: 132

Brand: TransAct Pages: 45

Brand: Kyocera Pages: 392

Brand: Skynet Pages: 18

Brand: Oki Pages: 239

imageRUNNER ADVANCE DX 717 Series

Brand: Canon Pages: 98

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands