Epson LQ-2090 Page 149 Reference Manual Download

Page: 149 / 248

Problem Solver

141

The printer does not load continuous paper or does not feed it
properly.

Cause

What to do

The paper release lever is not
set correctly.

Set the paper release lever to the position
for the paper source you want to use. See
“Setting the Paper Release Lever” on
page 11 for instructions.

Single-sheet paper is in the
paper path.

Press the

Load/Eject

button to eject the

sheet.

Continuous paper is not
loaded properly.

See “Loading Continuous Paper” on
page 14 for instructions on loading
continuous paper with the tractor you
want to use.

The paper-thickness lever is
not set correctly.

Set the paper-thickness lever to match
the thickness of your paper. See
“Adjusting the Paper-Thickness Lever”
on page 12 for instructions.

The printer does not feed continuous paper to the standby
position.

Cause

What to do

You have not torn off the
printed pages before pressing
the

Load/Eject

button.

Tear off the printed pages at the
perforation. Then press the

Load/Eject

button to feed the paper backward to the
standby position.

Summary of Contents for LQ-2090

























































































































































































































































Search results

Summary of Contents for LQ-2090

Reviews:

Related manuals for LQ-2090

Brands by name

Popular brands

Epson LQ-2090, Reference Manual

Search results

Summary of Contents for LQ-2090

Reviews:

Related manuals for LQ-2090

Brands by name

Popular brands