manualshive.com logo in svg

Epson LQ-2090, Reference Manual, Page: 110 / 248

Share
Download
Epson LQ-2090 Reference Manual Download Page 110

102

Printer Software

❏

If the printer driver is installed in the client beforehand, you 
need to select the new printer driver or the current printer 
driver. When the prompt to select the printer driver appears, 
select the printer driver according to the message.

❏

If the additional driver for Windows NT 4.0 is installed in the 
Windows XP or 2000 printer server, go to the next step.

❏

If the additional driver for Windows NT 4.0 is not installed in 
the Windows XP or 2000 printer server or the printer server’s 
OS is Windows Me, 98, or 95, go to “Installing the printer 
driver from the CD-ROM” on page 102.

5. Select whether to use the printer as the default printer or not, 

then click 

OK

.

6. Click 

Finish

.

Installing the printer driver from the CD-ROM

This section describes how to install the printer driver in the 
clients when setting the network system as follows:

❏

The additional drivers are not installed in the Windows XP, 
2000, or Windows NT 4.0 printer server.

❏

The printer server’s OS is the Windows Me, 98, or 95 and the 
client’s OS is the Windows XP, 2000, or Windows NT 4.0.

The on-screen displays on the following pages may differ 
depending on the version of Windows OS.

Note:

❏

When installing in Windows XP, 2000, or Windows NT 4.0 clients, 
you must access Windows XP, 2000, or Windows NT 4.0 with the 
Administrator.

Summary of Contents for LQ-2090

























































































































































































































































Reviews:

No comments