Lexicon RV-8, User Manual, Page: 97 / 238

SETUP
Lexicon
3-44
DTS(-ES)
Sources
Dolby Digital
Sources
2-Channel
Sources
DOLBY PLII MOVIE DOLBY DIGITAL* DTS(-ES)*
EXTERNAL NOISE TEST
Opens the SPEAKER LEVEL ADJUST menu shown above, which can
be used to adjust output levels while the external noise test is
conducted. The external noise test requires an external calibration
source, such as an audio calibration disc.
When the external noise test is conducted, the RV-8 activates a
listening mode based on the Main Zone input source that is pres-
ent. The table in the next column indicates the listening mode that
is activated for each input source. When a listening mode is acti-
vated during the external noise test, it retains its factory-default
settings, ignoring custom settings that might have been made on
the corresponding listening mode menu. Custom settings will be
restored after the external noise test is complete.
EXTERNAL NOISE TEST LEVELS CALIBRATION SPEAKERS SETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER
SETUP
SETUP
INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
SPEAKERS
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
0.0dB 0.0dB
0.0dB 0.0dB 0.0dB
0.0dB 0.0dB
0.0dB
L
M
SUB
R
C
SL
SR
RL
RR
LEVELS CALIBRATION
LEVELS CALIBRATION
INTERNAL NOISE TEST
EXTERNAL NOISE TEST
BASS PEAK LIMITER
EXTERNAL NOISE TEST
SPEAKER LEVEL ADJUST
FRONT LEFT +0.0dB
0.0dB
FRONT RIGHT
+0.0dB
SIDE RIGHT +0.0dB
REAR RIGHT +0.0dB
REAR LEFT +0.0dB
SIDE LEFT +0.0dB
SUB +0.0dB
* These listening mode names differ depending on the input source, the speaker
configuration and certain parameter settings.