manualshive.com logo in svg

Lexicon RV-8, User Manual

The Lexicon RV-8 user manual, an essential resource for maximizing your audio experience, is now available for free download. Discover detailed instructions, handy tips, and exciting features in our comprehensive manual. Stay up to date with the latest enhancements by accessing the Release Notes section. Download now from manualshive.com.

Share
Download
background image

Basic Operation

RV-8

2-13

HEADPHONE OVERVIEW

Understanding the Headphones

Headphones can be connected to the RV-8 via the Headphone 
output on the front-panel.  The headphone output follows the sig-
nal selected in the Main Zone. If the Main Zone source is multi-
channel, a downmix of that source will be sent to the headphone
output. LOGIC7 headphone processing is also available for stereo
or multichannel sources. If you would like to listen to a stereo
source without enhanced processing, set the 2-CH parameter in
the INPUT SETUP menu to the 2-CHANNEL listening mode.  When
headphones are plugged into the headphone output, all amplifier
outputs are muted (including outputs 3 and 7, except if they are
assigned to Zone 2 or Zone 3). The Main Zone preamplifier
outputs are also muted. Preamplifier outputs for Zone 2 and Zone
3 remain unmuted. The front-panel volume knob or the remote
control 

Volume Up/Down

buttons adjust the level of the head-

phone output. 

When the headphones are plugged in, the volume will be set to the
HEADPHONE parameter value selected in the VOLUME CONTROL
SETUP menu. When the headphones are unplugged, the volume
will return to the value of the MAIN PWR ON parameter in the
VOLUME CONTROL SETUP menu. See page 6-32 for headphone
listening mode descriptions.

Amplifier Overview

(continued from page 2-12)

Amplifier Channel Status 

Each channel has a blue Channel Status LED on the front-panel that
is illuminated when the unit is powered on. If there is a problem
with an amplifier channel, the LED will turn off.   

Making Connections With the Amplifier Outputs

The amplifier output connectors can accept bare speaker wires,
banana plug connectors or certain spade connectors. When using
bare speaker wires, loosen the connector, insert the wire into the
top of the receptacle, then tighten the connector. The same
procedure should be used for spade connectors. Banana plugs
should be inserted into the outward-facing receptacle.

Use heavy-gauge speaker cable to ensure low-impedance connec-
tions between the amplifier and the speakers. Observe correct
speaker polarity.

Do not connect the outputs of one channel to the outputs of
other channels or to other amplifiers.

CAUTION

Summary of Contents for RV-8















































































































































































































































Reviews:

No comments

Related manuals for RV-8

Pansat T-100 User Manual preview
T-100
Brand: Pansat Pages: 32
Mammut BARRYVOX Reference Manual preview
BARRYVOX
Brand: Mammut Pages: 40
NAD L 70 Specification Sheet preview
L 70
Brand: NAD Pages: 2
Vanderbilt SPCW120 Manual preview
SPCW120
Brand: Vanderbilt Pages: 5
DigitalBox IMPERIAL HD 2 basic Installation Manual preview
IMPERIAL HD 2 basic
Brand: DigitalBox Pages: 96
PCTV Systems Broadway HD-S2 Quick Install Manual preview
Broadway HD-S2
Brand: PCTV Systems Pages: 2
Xilinx LogiCORE IP Spartan-6 Getting Started Manual preview
LogiCORE IP Spartan-6
Brand: Xilinx Pages: 51
GBD DRS4335 Instructions For Installations preview
DRS4335
Brand: GBD Pages: 4
Elecom LBT-PAR02 Series Manual preview
LBT-PAR02 Series
Brand: Elecom Pages: 2
Icom IC-A15S Instruction Manual preview
IC-A15S
Brand: Icom Pages: 40
Nav TV MOST-HUR NTV-KIT155 User Manual preview
MOST-HUR NTV-KIT155
Brand: Nav TV Pages: 6
Videotec MICRODEC485 Operating Instructions Manual preview
MICRODEC485
Brand: Videotec Pages: 37
Alinco DJ-V5E Instruction Manual preview
DJ-V5E
Brand: Alinco Pages: 49
TV Star T7100 CX HD User Manual preview
T7100 CX HD
Brand: TV Star Pages: 16
Aiwa CX-BK7 Service Manual preview
CX-BK7
Brand: Aiwa Pages: 160
Panasonic TU-PT600E Operating Instructions Manual preview
TU-PT600E
Brand: Panasonic Pages: 44
LG SH72TZ-C Owner'S Manual preview
SH72TZ-C
Brand: LG Pages: 32
LG TCH-M550 Owner'S Manual preview
TCH-M550
Brand: LG Pages: 20

Brands by name

Popular brands

Load more brands