Lexicon RV-8, User Manual, Page: 203 / 238

Appendix C
RV-8
C-16
Programming the Backlight to Turn Off
The backlight can be toggled On and Off by pushing the LIGHT
button on the top right side of the remote. It can also be set to turn
off at a predetermined time.
To program the backlight:
1. Go to the SETUP mode by pressing the HOME and ENT
buttons simultaneously for three seconds.
2. Press the LIGHT button next to the LCD screen.
3. Using the number pad buttons, enter the desired backlight
time (in seconds). It can go up to 99 seconds. Save the time by
pressing the button to the right of the time just assigned.
4. Exit from the SETUP mode by pressing the HOME button.
Note:
The time entered in SETUP for the backlight to go off
is extended each time a button is pushed. The light
will turn off at the predetermined interval after the
last button has been pushed.
Cloning the RV-8 Remote Control
To clone the remote from another remote:
1. Go to the SETUP mode by pressing the HOME and ENT but-
tons simultaneously for three seconds.
2. Press the CLONE button next to the LCD screen.
3. Press either the SEND or RECV button depending upon the role
of the remote control. If the RV-8 remote is to be copied from,
press the SEND button. If it is to be copied to, press the RECV
button.
4. To clone the entire remote, press the ALL button. To clone only
5. Exit from SETUP mode by pressing the HOME button once
again.
Erasing Learned Buttons
To erase learned buttons:
1. Go to the SETUP mode by pressing both the HOME and ENT
buttons simultaneously for three seconds.
2. Press the ERASE button next to the LCD screen.
3. Press the LEARN button.
4. If you wish to erase all the learned functions in the RV-8
remote, press the ALL button and then press the SURE? button
at the next LCD screen.
5. To erase all the buttons in a single device or an individual
button in the device, press the DEVICE button.
6. Press the device button (TV, VCR, MAIN, etc.) to erase the
button(s) from the device.
Note:
Press the PAGE button and then press the DEVICE
button (TV, VCR, etc.) to erase the learned function in
the device button itself. Programming this learned
function to the Device button is described on page A-
30.
7. Press the ALL button to erase all the learned buttons in the
device and press the SURE? button at the next LCD screen.
8. Press a single button to erase individual buttons one at a time.
This will show all the functions in the device. Press the button
you wish to erase.