manualshive.com logo in svg

Lexicon RV-8, User Manual

The Lexicon RV-8 user manual, an essential resource for maximizing your audio experience, is now available for free download. Discover detailed instructions, handy tips, and exciting features in our comprehensive manual. Stay up to date with the latest enhancements by accessing the Release Notes section. Download now from manualshive.com.

Share
Download
background image

MODE ADJUST

Lexicon

6-38

PANORAMA

ON, OFF

When set to ON, extends the front stereo image to include 
surround channel signals, which creates a “wraparound” effect
with side wall imaging.

Note:

The DOLBY PLII MUSIC listening mode PANORAMA
parameter should not be confused with the separate
PANORAMA listening mode (page 6-12).

PRE-DELAY

OFF, 1ms to 100ms

Adjusts delay time between the direct sound and the onset of
reverberation. Higher settings make the simulated space sound
larger. Because some pre-delay is inherent in all source material, it
is recommended to begin with the parameter set to OFF, then
make adjustments accordingly.

RE-EQUALIZER

ON, OFF

Simulates high-frequency rolloffs that occur in movie theaters.
When set to ON, the RV-8 applies a high-frequency filter. When set
to OFF, the RV-8 does not apply a high-frequency filter. It is
recommended that you set this parameter to ON for film sources,
as many films are mixed for movie theaters and might sound too
bright when played back in home theaters without re-equalization. 

REAR DLY OFFSET

OFF, 1ms to 30ms

Increases the perceived depth of the listening space by delaying
the arrival time of rear speaker signals. It is recommended that you
increase the setting when using side and rear speakers that are
located close together or when a greater sense of depth is desired
in the listening space.

REAR L/R

OFF, -30dB to +12dB

Controls the output level of the Main Zone audio output
connector labeled Rear L/R.

RESET MODE

Restores the factory-default version of the selected listening mode,
restoring all listening mode menu parameters to their factory-
default settings.

To  restore the factory-default version of the selected listening
mode:

1. Follow the RESET MODE menu path. The “PRESS RIGHT 

V

TO

RESTORE MODE” drop-down message.

2. When the drop-down message opens, press the Menu 

arrow to restore the factory-default version of the selected
listening mode and close the message. Press the Menu 

arrow

to close the message without restoring the factory-default
version of the selected listening mode. 

RESET MODE

CUSTOM

(Listening Mode)

MODE ADJUST

REAR L/R

OUTPUT LEVELS

(Listening Mode)

MODE ADJUST

Summary of Contents for RV-8















































































































































































































































Reviews:

No comments

Related manuals for RV-8

National Criterion Instruction Book preview
Criterion
Brand: National Pages: 14
HAMTRONICS R100 Assembly, Installation, & Maintenance preview
R100
Brand: HAMTRONICS Pages: 11
Racal Instruments RA6790/GM Technical Manual preview
RA6790/GM
Brand: Racal Instruments Pages: 319
R&S FSMR Operating Manual preview
FSMR
Brand: R&S Pages: 955
Soundstream VCD-30 Instruction Manual preview
VCD-30
Brand: Soundstream Pages: 12
Axxera AV714BH Installation & Owner'S Manual preview
AV714BH
Brand: Axxera Pages: 32
PCB Piezotronics JM353B18 Installation And Operating Manual preview
JM353B18
Brand: PCB Piezotronics Pages: 17
Icom IC-290A/E Instruction Manual preview
IC-290A/E
Brand: Icom Pages: 47
YBA DESIGN YA701 User Manual preview
YA701
Brand: YBA DESIGN Pages: 54
Aurora Design AAC/MP3 User'S Operation Manual preview
AAC/MP3
Brand: Aurora Design Pages: 6
F&F RS-407B Manual preview
RS-407B
Brand: F&F Pages: 8
D+M Group AVR-1912 Model Information preview
AVR-1912
Brand: D+M Group Pages: 19
Outland Technology UWS-3210 Operating Instructions Manual preview
UWS-3210
Brand: Outland Technology Pages: 34
Zeus ZRC-20 Installation Manual preview
ZRC-20
Brand: Zeus Pages: 4
Velleman-Kit High-Q K6703 Manual preview
High-Q K6703
Brand: Velleman-Kit Pages: 28
SoundMax SM-CCR3049F Instruction Manual preview
SM-CCR3049F
Brand: SoundMax Pages: 32
Yaesu FT DX 9000MP CONTEST - DATA MANAGEMENT OPERATION Operation Manual preview
FT DX 9000MP CONTEST - DATA MANAGEMENT OPERATION
Brand: Yaesu Pages: 180
Soundstream VR-346 Owner'S Manual preview
VR-346
Brand: Soundstream Pages: 29

Brands by name

Popular brands

Load more brands