Lexicon RV-8, User Manual

Page: 103 / 238

SETUP
Lexicon
3-50
MAIN 5.1 & Zone3 2.0
Configures amplifier outputs 3 and 7 for use in Zone 3. Outputs 1,
2, 4, 5 and 6 will be configured for use in the Main Zone. The input
source selected for Zone 3 will be output on amplifier
outputs 3 and 7.
Note:
If the current speaker configuration is using rear
speakers, a warning message will appear alerting the
user to the fact that the rear speakers will be disabled
for the Main Zone when the 5.1 MAIN & Zone3 2.0
setting is chosen. Press the right menu button to
confirm the change. Pressing any other button will
cancel the change.
MAIN 7.1
When set to Main 7.1, all of the amplifier outputs on the rear panel
will be configured for use in the Main Zone. Outputs 3 and 7 are
used for the rear speakers (Rear L/R).
MAIN 5.1 & Zone2 2.0
Configures amplifier outputs 3 and 7 for use in Zone 2. Outputs 1,
2, 4, 5 and 6 will be configured for use in the Main Zone. The input
source selected for Zone 2 will be output on amplifier
outputs 3 and 7.
Note:
If the current speaker configuration is using rear
speakers, a warning message will appear alerting the
user to the fact that the rear speakers will be disabled
for the Main Zone when the 5.1 MAIN & Zone2 2.0
setting is chosen. Press the right menu button to con-
firm the change. Pressing any other button will
cancel the change.
I/O CONFIG
ANALOG INPUTS
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
I/O CONFIG
AMP OUTPUTS
MAIN 7.1
MAIN 5.1 & ZONE2 2.0
MAIN 5.1 & ZONE3 2.0
SETUP MAIN 7.1 I/O CONFIG AMP OUTPUTS
SETUP I/O CONFIG AMP OUTPUTS MAIN 5.1 & ZONE2 2.0
SETUP I/O CONFIG AMP OUTPUTS
MAIN 5.1 & ZONE3 2.0
AMP OUTPUTS