manualshive.com logo in svg

Lexicon RV-8, User Manual

The Lexicon RV-8 user manual, an essential resource for maximizing your audio experience, is now available for free download. Discover detailed instructions, handy tips, and exciting features in our comprehensive manual. Stay up to date with the latest enhancements by accessing the Release Notes section. Download now from manualshive.com.

Share
Download
background image

SETUP

Lexicon

3-48

MAIN MENU

MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS

I/O CONFIG

Selecting the SETUP menu I/O CONFIG option opens the I/O CON-
FIG menu shown above, which can be used to configure the
analog audio input connectors as eight stereo connectors, five

I/O CONFIG

SETUP

stereo and one 5.1-channel connectors, or two stereo and two 5.1-
channel connectors. The I/O CONFIG menu can also be used to
configure the amplifier outputs. 

8 STEREO INPUTS

Configures the analog audio input connectors as eight stereo
connectors, which is the factory-default configuration.

When the analog audio input connectors are configured as
eight stereo connectors:

•

All connectors are configured as stereo connectors.

•

Neither of the 5.1-channel connectors is available. Sources that
were assigned to the 5.1-channel connector labeled 3, 4 and 5
are reassigned to the stereo connectors labeled 3, 4 and 5.
Sources that were assigned to the 5.1-channel connector

I/O CONFIG

SETUP

I/O CONFIG

AMP OUTPUTS

SETUP

SETUP

INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS

I/O CONFIG

labeled 6, 7 and 8 are reassigned to the stereo connectors
labeled 6, 7 and 8.

5 ST & (1) 5.1 ANLG

Configures the analog audio input connectors as five stereo and
one 5.1-channel connectors.

When the analog audio input connectors are configured as five
stereo and one 5.1-channel connectors:

•

The connectors labeled 1, 2, 3, 4, and 5 are configured as
stereo connectors. 

•

The connectors labeled 6, 7, and 8 are configured as a
5.1-channel connector. This connector is sent to the Main
Zone speaker and audio output connectors as indicated in the
table on the next page.

•

Two-channel sources that were assigned to the stereo
connectors labeled 6, 7, and 8 are reassigned to the
5.1-channel connector labeled 6, 7, and 8. The 5.1-channel
connectors should only be used with 5.1-channel analog
sources such as DVD-As and SACDs.

I/O CONFIG

SETUP

REAR PANEL CONFIG

8 STEREO INPUTS
OR
5 ST & (1) 5.1 ANLG 
OR
2 ST & (2) 5.1 ANLG

8 STEREO INPUTS

5 ST & (1) 5.1 ANLG

ANALOG INPUTS

ANALOG INPUTS

ANALOG INPUTS

Summary of Contents for RV-8















































































































































































































































Reviews:

No comments

Related manuals for RV-8

Cables to Go 29346 User Manual preview
29346
Brand: Cables to Go Pages: 5
Teac CR-H257i Owner'S Manual preview
CR-H257i
Brand: Teac Pages: 56
Majestic DAB-442 Quick Start Manual preview
DAB-442
Brand: Majestic Pages: 13
Duevi RX2AP Installation And Use Manual preview
RX2AP
Brand: Duevi Pages: 4
Magnat Audio MR 750 Important Notes For Installation & Warranty Card preview
MR 750
Brand: Magnat Audio Pages: 54
Keysight Technologies M1740A Getting Started Manual preview
M1740A
Brand: Keysight Technologies Pages: 39
Boss Audio Systems BV9371BD User Manual preview
BV9371BD
Brand: Boss Audio Systems Pages: 23
Onkyo TX-RZ920 Basic Manual preview
TX-RZ920
Brand: Onkyo Pages: 50
GES AudioTroll 9400 Operating & Installation Manual preview
AudioTroll 9400
Brand: GES Pages: 13
Rotel RSX-965 Owner'S Manual preview
RSX-965
Brand: Rotel Pages: 24
F&U MPF3384 User Manual preview
MPF3384
Brand: F&U Pages: 23
Yaesu FT-10R Instruction Manual preview
FT-10R
Brand: Yaesu Pages: 17
Alinco DJ-FX446 Instruction Manual preview
DJ-FX446
Brand: Alinco Pages: 32
Velleman VM119 Manual preview
VM119
Brand: Velleman Pages: 32
DigiTech AR1877 User Manual preview
AR1877
Brand: DigiTech Pages: 6
Optimus 120-1995 User Manual preview
120-1995
Brand: Optimus Pages: 18
Boss Audio Systems BV7464B User Manual preview
BV7464B
Brand: Boss Audio Systems Pages: 35
Sangean ProTravel PT10 Specification Sheet preview
ProTravel PT10
Brand: Sangean Pages: 1

Brands by name

Popular brands

Load more brands