manualshive.com logo in svg

Lexicon RV-8, User Manual, Page: 144 / 238

Share
Download
Lexicon RV-8 User Manual Download Page 144

5.1-Channel Dolby

Digital EX (Non-Flagged)

5.1-Channel Dolby

Digital EX (Flagged)

5.1-Channel

Dolby Digital

Note:

The RV-8 cannot automatically detect Dolby Digital
Surround EX encoding in non-flagged 5.1-channel
Dolby Digital sources. A non-flagged source does not
include information in the input signal that identifies
Dolby Digital Surround EX encoding.

MODE ADJUST

Lexicon

6-20

The table below indicates the conditions in which Dolby Digital
Surround EX decoding is engaged.

•

Dolby Digital Surround EX decoding is engaged when the EX
DECODING parameter is set to ON, or the EX DECODING
parameter is set to AUTO and a flagged 5.1-channel Dolby
Digital source recorded with Dolby Digital Surround EX is
detected.

•

Dolby Digital Surround EX decoding is not engaged when the
EX DECODING parameter is set to OFF, or the EX DECODING
parameter is set to AUTO and a non-flagged 5.1-channel Dolby
Digital source recorded with or without Dolby Digital Surround
EX is detected.

•

Listening mode name differs depending on the encoding
present in the input source, the EX DECODING parameter
setting and the speaker setup.

–

The DOLBY DIGITAL EX listening mode is available when
Dolby Digital Surround EX decoding is engaged.

–

The DOLBY DIGITAL listening mode is available when
Dolby Digital Surround EX decoding is not engaged.

–

The DOLBY DIGITAL EX listening mode cannot be activated
unless both side and rear speakers are present.

DOLBY DIGITAL

DOLBY DIGITAL EX

DOLBY DIGITAL

EX DECODING: AUTO

DOLBY DIGITAL EX

DOLBY DIGITAL EX

DOLBY DIGITAL EX

EX DECODING: ON

DOLBY DIGITAL

DOLBY DIGITAL

DOLBY DIGITAL

EX DECODING: OFF

Parameter
Setting

Input

Source

Summary of Contents for RV-8















































































































































































































































Reviews:

No comments