Lexicon RV-8, User Manual

Page: 200 / 238

Appendix C
Lexicon
C-13
To program “punch through” functions:
1. Go to the SETUP mode by pressing the HOME and ENT
buttons simultaneously for three seconds.
2. Press the PUNCH button next to the LCD screen.
Note:
When using “Punch Through,” think of the first
device selected as the device that now controls the
functions, and think of the second device as the
device you want to control those functions. You are
taking the controls of the second device and “punch-
ing them through” to the first device.
3. Press the VOL button on the LCD for Volume Punch Through,
the PLAY button for Transport Punch Through and the CH
button for Channel Punch Through.
4. Select the device you wish to “punch through” to (first device
example - television or satellite receiver).
5. Select the device you wish to “punch through” from (second
device example - RV-8 MAIN).
You are punching through the controls of the second device to the
device that is currently being controlled by any other buttons. For
example, for VOL you are “punching through” the controls of the
RV-8 MAIN VOL to the TV or SAT, enabling you to control the
RV-8 MAIN VOL when in the TV or SAT screen.
6. Punch Through is saved when the second device is pressed.
7. Repeat from step 2 to program Punch Through for other
devices.
8. Once you complete the programming and wish to exit from
this mode, press the HOME button. Exit from the SETUP mode
by pressing the HOME button once again.
9. Repeat from step 5 to “punch through” any other devices or
learned buttons.
10. Press the HOME button to exit to main Punch Through mode.
Press the HOME button once again to exit the SETUP mode.
Erasing Macro Functions
To erase M1, M2, M3, Power, System Off buttons:
1. Go to the SETUP mode by pressing both the HOME and ENT
buttons simultaneously for three seconds.
2. Press the ERASE button next to the LCD screen.
3. Press the MACRO button.
4. To erase all of the macro buttons in the RV-8 remote, press the
ALL button and then press the SURE? button at the next LCD
screen.
5. To erase just one of the macros, press the KEY button at step 4
and then one of the M1, M2, M3, POWER or SYSTEM OFF but-
tons to erase the macro functions from that button.
6. Repeat from step 5 to erase any other macro buttons.
7. Press the HOME button to exit to main Erase mode.
8. Press the HOME button once again to exit the SETUP mode.
Erasing Favorite Channel Buttons
To erase favorite channel buttons:
1. Go to the SETUP mode by pressing both the HOME and ENT
buttons simultaneously for three seconds.