Lexicon RV-8, User Manual

Page: 133 / 238

MODE ADJUST
RV-8
6-9
+
• Designed for playback of matrix-encoded digital stereo film
sources.
• Applies THX re-equalization to simulate high-frequency rolloffs
that occur in movie theaters. Most films are mixed for movie
theaters, and might sound too bright when played back in
home theaters without re-equalization.
Option/ Default Possible
Parameter Setting Settings
RE-EQUALIZER ON ON, OFF
OUTPUT LEVELS Refer to page 6-37
CUSTOM Refer to page 6-34
Listening mode menu option and parameter descriptions begin on page 6-33.
R
MUSIC
• Designed for playback of matrix-encoded digital stereo music
sources.
• Derives six channels when both side and rear speakers are
present (rear channels will be in parallel). Derives five channels
when only side or rear speakers are present. The subwoofer
channel is generated through bass management in the RV-8.
Option/
Parameter
OUTPUT LEVELS Refer to page 6-37
CUSTOM Refer to page 6-34
Listening mode menu option and parameter descriptions begin on page 6-33.
Please note the following about DTS NEO:6 listening mode
activation:
• The DTS neo:6 listening modes cannot be assigned as the pre-
ferred listening mode for 2-channel sources. However, when
the 2-CH parameter is set to USE LAST, the RV-8 will automat-
ically activate a DTS neo:6 listening mode if a DTS neo:6 lis-
tening mode was activated the last time a 2-channel source
was present.
• The RV-8 will not automatically activate the DTS neo:6 listen-
ing modes unless a 44.1kHz or 48kHz PCM digital source is
present. The DTS neo:6 listening modes are not available with
88.2kHz or 96kHz, Dolby Digital, or analog sources.
• The DTS neo:6 MUSIC listening mode can be activated with
the front-panel or remote control Mode
and buttons. The
DTS neo:6 CIN listening mode can also be activated with the
remote control DTS button when a 2-channel input source is
present.
R
MODE ADJUST DTS neo:6 MUSIC MODE ADJUST DTS ne + o:6