manualshive.com logo in svg

Lexicon RV-8, User Manual

The Lexicon RV-8 user manual, an essential resource for maximizing your audio experience, is now available for free download. Discover detailed instructions, handy tips, and exciting features in our comprehensive manual. Stay up to date with the latest enhancements by accessing the Release Notes section. Download now from manualshive.com.

Share
Download
background image

Appendix C

RV-8

C-18

Recalling the Zone Audio Codes for the RV-8 

To recall the RV-8 zone audio codes:

1.  Simultaneously press MAIN and ENT buttons to access SETUP

mode. 

2.  Press the RECAL button next to the LCD screen.

3.  The LCD display will alternatively flash device names and the

three-digit code number assigned to the device for 10 seconds
and then exit to the SETUP mode. Make sure that the audio
code has the correct (default) number. 

4.   The MAIN zone default audio code should be 001. The ZONE

2 default audio code is 302, and the ZONE 3 default audio
code is 303. If one of these codes has inadvertently been
changed, reprogram the codes as described below.

Reprogramming the Zone Audio Codes to Default Codes

To reprogram the RV-8 zone audio codes:

1.  Simultaneously press MAIN and ENT buttons to access SETUP

mode. 

2.   Press the P-PRO button next to the LCD screen.

3.  The remote should flash SELECT BUTTON at the bottom of the

LCD screen. Press the button for the zone you wish to repro-
gram.  

4.   The remote should flash FROM TABLE at the bottom of the LCD

screen. Select the MAIN zone button.

5.   The remote should flash ENTER NUMBER. The correct (default)

audio codes for the RV-8 zones are as follows: MAIN zone is
001, ZONE 2 is 302 and ZONE 3 is 303.  

6.   Enter the correct code.

7.   Press SAVE on the right of the LCD screen to enter and save the

audio code for the zone.  

8.   Exit from Preprogrammed mode by pressing the HOME button

and then exit from the SETUP mode by pressing the HOME
button once again.

Summary of Contents for RV-8















































































































































































































































Reviews:

No comments

Related manuals for RV-8

Caliber RMD 574BT Manual preview
RMD 574BT
Brand: Caliber Pages: 16
Caliber MCD901 Quick Start Manual preview
MCD901
Brand: Caliber Pages: 11
JBL Legend CP100 User Manual preview
Legend CP100
Brand: JBL Pages: 6
LAPIS Semiconductor ML7344 Start Manual preview
ML7344
Brand: LAPIS Semiconductor Pages: 12
Samyung ENC SRG-400 Instruction Manual preview
SRG-400
Brand: Samyung ENC Pages: 64
Aiwa CDC-X155M Service Manual preview
CDC-X155M
Brand: Aiwa Pages: 5
Icom IC-F33GT Service Manual preview
IC-F33GT
Brand: Icom Pages: 7
National Instruments PXIe-5842 Getting Started preview
PXIe-5842
Brand: National Instruments Pages: 43
Q-Audio QWM 1960 V2 Manual preview
QWM 1960 V2
Brand: Q-Audio Pages: 4
Alpine CDA-9851 Owner'S Manual preview
CDA-9851
Brand: Alpine Pages: 36
DAB SmartDAB Installation & User Manual preview
SmartDAB
Brand: DAB Pages: 8
a-them mrx 1120/720 Operating Manual preview
mrx 1120/720
Brand: a-them Pages: 66
B&K AVR212 Owner'S Manual preview
AVR212
Brand: B&K Pages: 88
Racal Instruments PRC-41 Quick Start Manual preview
PRC-41
Brand: Racal Instruments Pages: 14
Aiwa ZD5GNDM Service Manual preview
ZD5GNDM
Brand: Aiwa Pages: 23
Renkforce 2147375 Operating Instructions Manual preview
2147375
Brand: Renkforce Pages: 8
Sigma HDTV5 User Manual preview
HDTV5
Brand: Sigma Pages: 23
Blaupunkt Lexington C32 Operating And Installation Instructions preview
Lexington C32
Brand: Blaupunkt Pages: 80

Brands by name

Popular brands

Load more brands