Lexicon RV-8 User Manual Download Page 160 | Manualshive

Page: 160 / 238

background image

MODE ADJUST

Lexicon

6-36

When the Shift command bank is activated, pressing the remote
control DTS button while a DTS(-ES) input source is present toggles
the ES DECODING parameter, cycling through the AUTO, ON and
OFF settings.

Note:

The DTS(-ES) STATUS menu includes the SB level
meter when:

•

The ES DECODING parameter is set to ON and a
5.1-channel DTS source is present.

•

The ES DECODING parameter is set to AUTO and
a 5.1-channel matrix-encoded or 6.1-channel
discrete-encoded DTS-ES source is present.

EX DECODING

AUTO, ON, OFF

Controls the Dolby Digital Surround EX decoding feature, which
can be used to extract a rear channel from 5.1-channel Dolby
Digital sources.

•

When set to ON, Dolby Digital Surround EX decoding is
engaged for all 5.1-channel Dolby Digital sources.

•

When set to OFF, Dolby Digital Surround EX decoding is not
engaged for all 5.1-channel Dolby Digital sources.

•

When set to AUTO, Dolby Digital Surround EX decoding is
engaged when a flagged 5.1-channel Dolby Digital source
recorded with Surround EX is detected. Dolby Digital Surround
EX decoding is not engaged when a non-flagged 5.1-channel
Dolby Digital source recorded with or without Surround EX is
detected.

•

The RV-8 cannot automatically detect Dolby Digital Surround
EX encoding in non-flagged 5.1-channel Dolby Digital sources.

A non-flagged source does not include information in the input
signal that identifies Dolby Digital Surround EX encoding.

The DOLBY DIGITAL EX listening mode is available when Dolby
Digital Surround EX decoding is engaged. The DOLBY DIGITAL lis-
tening mode is available when Dolby Digital Surround EX decod-
ing is not engaged. Dolby Digital Surround EX decoding cannot be
engaged unless both side and rear speakers are present. Refer to
page 6-20 for more information.

When the Shift command bank is activated, pressing the remote
control DOLBY button while a 5.1-channel Dolby Digital input
source is present activates the DOLBY DIGITAL EX or DOLBY DIGITAL
listening mode. Subsequent presses toggle the EX DECODING
parameter, cycling through the AUTO, ON and OFF settings.

FRONT STEERING

OFF, MSURR, MUSIC, FILM

Adjusts front steering between the front left, front right, and center
speakers. When set to FILM, maximum front steering is applied to
the center channel. When set to MUSIC, moderate front steering is
applied. When set to MSURR, minimum front steering is applied.
When set to OFF, no front steering is applied. It is recommended
that you set this parameter to FILM for film and broadcast sources
and to MUSIC, MSURR or OFF for music sources.

INPUT BALANCE

L< to <|> to >R

Controls the balance of the selected stereo analog audio input
connectors, compensating for audio input sources with audible
channel imbalance.

«
...
158
159
160
161
162
...
»

Summary of Contents for RV-8















































































































































































































































Reviews:

No comments

Related manuals for RV-8

Brand: Daikin Pages: 4

E-iSERV CD7200 mkII

Brand: Eclipse Pages: 119

Brand: Eclipse Pages: 230

CD5000 - ECLIPSE - Radio

Brand: Eclipse Pages: 40

Brand: Eclipse Pages: 20

Brand: Eclipse Pages: 98

Brand: Harman Kardon Pages: 13

Stratophonic SR300B

Brand: Harman Kardon Pages: 10

BRUKSANVISNING AVR 255

Brand: Harman Kardon Pages: 58

Brand: Harman Kardon Pages: 60

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 7

Brand: Harman Kardon Pages: 34

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 2

Brand: Harman Kardon Pages: 4

Brand: Harman Kardon Pages: 120

Brand: Harman Kardon Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands