Lexicon RV-8, User Manual

Page: 81 / 238

SETUP
Lexicon
3-28
RECORD
BLOCKED, ENABLED
Prevents recording device feedback loops. When BLOCKED is
selected, the RV-8 blocks the Zone 2 audio output connectors to
prevent feedback loops. However, the RV-8 still passes video input
signals to the Zone 2 video output connectors. When ENABLED is
selected, the RV-8 passes audio and video input signals to the Zone
2 audio and video output connectors.
DIGITAL BYPASS
ON, OFF
Allows digital sources to bypass decoding for direct digital record-
ing. When ON is selected, the RV-8 passes digital input signals
directly to the Zone 2 digital audio output connectors, preserving
the original format of the input signal. This would be useful if you
want to send a multichannel-encoded signal to a second device for
decoding. When OFF is selected and the ZONE2 IN parameter is
set to DIGITAL, Dolby Digital and DTS sources will not be passed to
the Zone 2 digital audio outputs. When OFF is selected and a PCM
source is present, the RV-8 will send the PCM audio to the Zone 2
digital audio output connectors. If a Dolby Digital or DTS source is
present and the ZONE2 IN parameter is set to DMIX, a downmix
of the source will be sent to the Zone 2 digital audio output
connectors.
DIG OUT RATE
INPUT, 96kHz, 88.2kHz, 48kHz, 44.1kHz
Controls the sample rate of analog input signals sent to the Zone 2
digital audio output connectors.
When a value is selected, the RV-8 runs the Zone 2 A/D converters
at the selected sample rate. It is recommended to set the DIG OUT
RATE parameter to the appropriate value when using a recording
format that operates on a single sample rate, such as CD-R format
(44.1kHz).
Note:
DIG OUT RATE only affects analog input signals. It
does not change the sample rate of digital input
signals, or downmixed signals.
SETUP INPUTS
DVD1 RECORD
ZONE2 ADVANCED
SETUP
SETUP
INPUTS
INPUTS
DVD1
DVD1
ZONE2 ADVANCED
ZONE2 ADVANCED
DIGITAL BYPASS
DIG OUT RATE