Lexicon RV-8, User Manual

Page: 51 / 238

Basic Operation
RV-8
2-33
STATUS MENU PARAMETER DESCRIPTIONS
2.0 ENCODING
MATRIX, NONE
Indicates whether or not a matrix-encoded source is detected.
When the parameter setting is MATRIX, a matrix-encoded source is
detected. When the parameter setting is NONE, a matrix-encoded
source is not detected. The RV-8 cannot automatically detect
matrix encoding in non-flagged input sources.
BIT RATE
32 to 640kbps or 754 to 1509.7kbps
Indicates the rate at which the input signal is encoded. A higher bit
rate indicates that less compression was used during the encoding
process. Possible settings for Dolby Digital sources range from 32
to 640 kbps. Possible settings for DTS (-ES) sources range from 754
to 1509.7kbps.
CENTER MIX LVL
-3.0dB, -4.5dB, -6.0dB
Indicates the relative level of the center channel that was used
during the mixing process.
CHANNELS
3/3.1, 3/2.1, 3/2, 3/1, 2/2, 2/1, 2/0, 1/0
Indicates the number of channels present in the input source. The
first digit indicates the number of front channels present. The digit
after the slash indicates the number of surround channels present.
The digit after the decimal point indicates the presence of LFE (low
frequency effects) information. For instance, if the parameter set-
ting is 3/2.1, an input source with three front channels, two
surround channels and LFE information is present. LFE information
is sent to the Main Zone audio output connector labeled Sub.
5.1a ANALOG STATUS
Provides information about 5.1-channel analog input sources.
Parameter Possible Settings
INPUT The selected input
MODE The activated listening mode
INPUT TYPE ANLG
SAMPLE RATE 96kHz
STATUS menu parameter descriptions begin on page 2-33.
5.1a STATUS
INPUT
MODE
INPUT TYPE ANLG
SAMPLE RATE 96kHz