Lenovo ThinkStation D30 User Manual Download Page 16 | Manualshive

Page: 16 / 152

background image

Your computer is preinstalled with software programs to help you work more easily and securely. For more
information, see “Lenovo programs” on page 5.

Preinstalled operating system

Your computer is preinstalled with one of the following operating systems:

• Microsoft Windows 7 operating system

• Microsoft Windows 8 operating system

• Microsoft Windows 8.1 operating system

Operating system(s), certified or tested for compatibility

1

(varies by model type)

• Red Hat Enterprise Linux

®

• Microsoft Windows XP Professional SP 3

1.

The operating system(s) listed here are being certified or tested for compatibility at the time this publication goes to
press. Additional operating systems might be identified by Lenovo as compatible with your computer following the
publication of this manual. This list is subject to change. To determine if an operating system has been certified or
tested for compatibility, check the Web site of the operating system vendor.

4

ThinkStation D30 User Guide

«
...
14
15
16
17
18
...
»

Summary of Contents for ThinkStation D30

























































































































































Reviews:

No comments

Related manuals for ThinkStation D30

System x3100 M4

Brand: IBM Pages: 332

Brand: Buffalo Pages: 2

FusionServer G5500 V6

Brand: xFusion Digital Technologies Pages: 100

Brand: TYAN Pages: 77

Brand: Goonas Pages: 13

Brand: Yawarra Pages: 4

Brand: IOGear Pages: 44

8668 - Eserver xSeries 232

Brand: IBM Pages: 182

VIP Media Server Pro

Brand: Chauvet Pages: 20

Brand: Dell Pages: 396

Brand: Dell Pages: 180

EqualLogic PS6010

Brand: Dell Pages: 57

PowerVault 700N

Brand: Dell Pages: 29

Brand: Dell Pages: 133

Brand: ADLINK Technology Pages: 62

Brand: XtendLan Pages: 54

Brand: eNet Pages: 7

Brand: ClearCube Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands