LSI Corporation
- 88 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 4: Ctrl-R Utility
Viewing and Changing Device Properties
3.
Press
OK
to change the learn mode.
4.13.12
Managing Dedicated Hot Spares
A dedicated hot spare is used to replace failed drives only in a selected drive group that contains the hot spare. You
can create or delete dedicated hot spares in the Virtual Drive Management screen.
Perform the following steps to create or delete dedicated hot spares:
1.
Navigate to a drive group in the
VD Mgmt
screen, and press the F2 key.
2.
Navigate to
Manage Dedicated Hotspare
, and press Enter.
The
Dedicated Hotspare
dialog appears, which shows a list of all hot spares that are available to create dedicated
hot spares.
Figure 60 Dedicated Hotspare
3.
Perform one of these steps:
—
To create a dedicated hot spare, select a drive and press
OK
.
—
To delete a dedicated hot spare, deselect the hot spare and press
OK
.
4.13.13
Securing a Drive Group
If a drive group is created with FDE drives (security enabled drives) and at the time of creation, the security is set to
No
;
later, you can secure that drive group using encryption.
Perform the following steps to secure a drive group:
1.
Navigate to the
VD Mgmt
screen, navigate to the drive group that you want to secure, and press the F2 key.
2.
Navigate to
Secure Drive Group
, and press Enter.
A message box appears asking for your confirmation.
3.
Press
Yes
to secure the drive group.
NOTE
After a virtual drive is secured, you will not be able to remove the
encryption without deleting the virtual drive.
Summary of Contents for ThinkServer RD650
Page 1: ...ThinkServer 12 Gb s MegaRAID SAS Software User Guide ...
Page 417: ......
Page 418: ......
