Lenovo ThinkServer RD650 User Manual Download Page 337

Page: 337 / 418

LSI Corporation

- 337 -

12Gb/s MegaRAID SAS Software User Guide



March 2014

Chapter 12: Using MegaRAID Advanced Software

Using the MegaRAID CacheCade Pro 2.0 Software

Figure 220 Parameters for CacheCade SSD Caching Virtual Drive

Enter a name for the CacheCade virtual drive in the

CacheCade - SSD Caching VD name

field.

Select a write policy from the

Write policy

drop-down list.

A description of the selected write policy appears below.

Click

Create Virtual Drive

The newly created virtual drive appears in the CacheCade SSD Caching Drive groups in the right frame. The

Remove Virtual Drive

button is enabled. You can select the newly created virtual drive and click

Remove Virtual

Drive

to delete the virtual drive.

10. Click

Next

The summary screen appears.

Summary of Contents for ThinkServer RD650



































































































































































































































































































































































































































Search results

Summary of Contents for ThinkServer RD650

Reviews:

Related manuals for ThinkServer RD650

Brands by name

Popular brands

Lenovo ThinkServer RD650, User Manual

Search results

Summary of Contents for ThinkServer RD650

Reviews:

Related manuals for ThinkServer RD650

Brands by name

Popular brands