manualshive.com logo in svg

Lenovo ThinkServer RD650, User Manual

The Lenovo ThinkServer RD650 is a reliable and high-performance server designed to meet your business needs. Discover its full potential with the User Manual and Hardware Maintenance Manual, available for free download at manualshive.com. Ensure smooth operation and maximize productivity with this comprehensive manual package.

Share
Download
background image

LSI Corporation

- 273 -

12Gb/s MegaRAID SAS Software User Guide

March 2014

Chapter 9: Configuration 

Adding Hot Spare Drives

3.

Click 

Next

.

The 

Create Virtual Drive - Drive group and Virtual drive settings

 dialog appears.

9.2.1

Converting JBOD to Unconfigured Good from the MegaRAID Storage Manager Main Menu

You can also convert JBOD to Unconfigured Good by performing these steps:

1.

Select 

Controller >Make UnConfigured Good

 from the main 

MegaRAID Storage Manager

 main menu.

The 

Make Configured Good

 dialog appears, as shown in the following figure.

Figure 164  Make Configured Good Dialog

2.

Select the JBOD drives to be configured as unconfigured good.

3.

Click 

OK

.

The selected JBOD drives are configured as unconfigured good.

9.3

Adding Hot Spare Drives

Hot spares are drives that are available to automatically replace failed drives in a RAID 1, RAID 5, RAID 6, RAID 10, 
RAID 50, or RAID 60 virtual drive. 

Dedicated hot spares

 can be used to replace failed drives in a selected drive group 

only. 

Global hot spares

 are available to any virtual drive on a specific controller.

To add a dedicated or global hot spare drive, follow these steps:

1.

Select the 

Physical

 tab in the left panel of the MegaRAID Storage Manager main menu, and click the icon of an 

unused drive.

For each drive, the window displays the port number, enclosure number, slot number, drive state, drive capacity, 
and drive manufacturer.

2.

Either select 

Go To > Physical Drive > Assign Global Hot Spare

, or select 

Go To > Physical Drive > Assign 

Dedicated Hot Spare

.

Summary of Contents for ThinkServer RD650



































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ThinkServer RD650

Panasonic KX-NS1000 Configuration Manual preview
KX-NS1000
Brand: Panasonic Pages: 31
IBM Z10 BUISNESS CLASS Z10 BC Reference Manual preview
Z10 BUISNESS CLASS Z10 BC
Brand: IBM Pages: 67
IBM x3450 - System - 7948 Quick Start Manual preview
x3450 - System - 7948
Brand: IBM Pages: 2
IBM NetVista N2800e Reference Manual preview
NetVista N2800e
Brand: IBM Pages: 82
xFusion Digital Technologies FusionServer CH242 V5 Manual preview
FusionServer CH242 V5
Brand: xFusion Digital Technologies Pages: 61
TRENDnet TE100-PS3 Administrator User Manual preview
TE100-PS3
Brand: TRENDnet Pages: 135
Supermicro SuperServer 6029U-TR25M User Manual preview
SuperServer 6029U-TR25M
Brand: Supermicro Pages: 151
Fujitsu PRIMERGY TX2540 M1 Operating Manual preview
PRIMERGY TX2540 M1
Brand: Fujitsu Pages: 92
Fujitsu PRIMERGY TX200 S5 Operating Manual preview
PRIMERGY TX200 S5
Brand: Fujitsu Pages: 114
Fujitsu PRIMERGY TX300 S5 Options Manual preview
PRIMERGY TX300 S5
Brand: Fujitsu Pages: 142
Fujitsu PRIMERGY TX200 S6 Operating Manual preview
PRIMERGY TX200 S6
Brand: Fujitsu Pages: 126
Fujitsu Server PRIMERGY TX1330 M1 Upgrade And Maintenance Manual preview
Server PRIMERGY TX1330 M1
Brand: Fujitsu Pages: 336
Fujitsu PRIMERGY TX300 S6 Options Manual preview
PRIMERGY TX300 S6
Brand: Fujitsu Pages: 122
Fujitsu SE300 Operating Manual preview
SE300
Brand: Fujitsu Pages: 86
Fujitsu S120 Series Operating Manual preview
S120 Series
Brand: Fujitsu Pages: 109
Fujitsu PRIMERGY TX200 S5 Options Manual preview
PRIMERGY TX200 S5
Brand: Fujitsu Pages: 110
Fujitsu PRIMERGY TX300 S5 Operating Manual preview
PRIMERGY TX300 S5
Brand: Fujitsu Pages: 118
Fujitsu S140 User Manual preview
S140
Brand: Fujitsu Pages: 115

Brands by name

Popular brands

Load more brands