Lenovo ThinkServer RD650, User Manual

Page: 301 / 418

LSI Corporation
- 301 -
12Gb/s MegaRAID SAS Software User Guide

March 2014
Chapter 10: Monitoring Controllers and Their Attached Devices
Testing Email Addresses of Recipients of Alert Notifications
10.10 Testing Email Addresses of Recipients of Alert Notifications
Use the Email tab in the Configure Alerts window to send test messages to the email addresses that you added for
the recipients of alert notifications.
1. Click the Email tab on the Configure Alerts window.
The Email section of the window appears, as shown in Figure 186 .
2. Click an email address in the Recipient email addresses field.
3. Click Test .
4. Confirm whether the test message was sent to the email address.
A pop-up message indicates if the test message sent to the email address was successful. If the MegaRAID
Storage Manager software cannot send an email message to the email address, an error message appears.
10.11 Removing Email Addresses of Recipients of Alert Notifications
Use the Email tab in the Configure Alerts window to remove email addresses of the recipients of alert notifications.
1. Click the Email tab on the Configure Alerts window.
The Email section of the window appears, as shown in Figure 186 .
2. Click an email address in the Recipient email addresses field.
The Remove button, which was grayed out, is now active.
3. Click Remove .
The email address is deleted from the list.
10.12 Saving Backup Configurations
You can save an
.xml
backup file of the entire alert configuration. This includes all the settings on the three tabs
( Alert Settings , Mail Server , and Email ).
1. On the Configure Alerts window, click the Alert Setting tab, the Mail Server tab, or the Email tab.
2. Click Save Backup .
The drive directory appears.
3. Enter a filename with an
.xml
extension for the backup configuration (in the format
filename.xml
).
4. Click Save .
The drive directory disappears.
5. Click OK .
The backup configuration is saved, and the Configure Alerts window closes.
10.13 Loading Backup Configurations
You can load all of the values from a previously saved backup into the Configure Alerts window (all tabs) to edit or
save these values as the current alert notification configuration.