Lenovo ThinkServer RD650, User Manual

Page: 392 / 418

LSI Corporation
- 392 -
12Gb/s MegaRAID SAS Software User Guide

March 2014
Appendix C: MegaCLI Commands to StorCLI Command Conversion
Battery Commands
C.6 Security Commands
Table 75 Security Commands
C.7 Virtual Drive Commands
Table 76 Virtual Drive Commands
Description MegaCLI Command StorCLI Command
Set the key ID for the controller.
MegaCli -CreateSecurityKey
-SecurityKey
sssssssssss |
[-Passphrase sssssssssss ]
|[-KeyID kkkkkkkkkkk ] -aN
storcli /c x set
SecurityKey= XXXXXX [passphrase= yyyyy ]
[keyId= zzzz ]
Change the security key for the
controller.
MegaCli -ChangeSecurityKey
-OldSecurityKey
sssssssssss | -Secur
ityKey sssssssssss |
[-Passphrase sssssssssss ] | [-keyID
kkkkkkkkkkk ] -aN
storcli /c x set
SecurityKey= XXXXXX OldSecurityKey= yyyy
y
Compare and verify the security
key for the controller.
MegaCli -VerifySecurityKey
-SecurityKey
sssssssssss -aN
storcli /c x compare SecurityKey= xxxxxx
Delete the security key.
MegaCLI -DestroySecurityKey |
[-Force] -aN storcli /c x delete SecurityKey
Set the security key for the
controller.
MegaCli -SetKeyID -KeyID
kkkkkkkkkkk -aN
storcli /c x set SecurityKey KeyId= xxxx
Description MegaCLI Command StorCLI Command
Show the virtual drive
information.
MegaCli –LDInfo –Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL storcli /c x /v( x |all) show
storcli /c x /v( x |all) show all
Set virtual drive properties.
MegaCli –LDSetProp WT | WB|NORA
|RA |
ADRA|-Cached|Direct|CachedBadBBU|
NoCachedBadBBU} | -RW|RO|Blocked |
{-Name nameString}
|-EnDskCache|DisDskCache –Lx|
-L0,1,2|-Lall -aN|-a0,1,2|-aALL storcli /c x /v( x |all) set
wrcache=WT|WB|AWB
storcli /c x /v( x |all) set rdcache=RA|NoRA
storcli /c x /v( x |all) set
iopolicy=Cached|Direct
storcli /c x /v( x |all) set
accesspolicy=RW|RO|Blocked|RmvBlkd
storcli /c x /v( x |all) set
pdcache=On|Off|Default
storcli /c x /v( x |all) set
name=< NameString >
Set power-saving (dimmer
switch) properties.
MegaCli -LDSetPowerPolicy
-Default| -Automatic| -None|
-Maximum| -MaximumWithoutCaching
-Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL storcli /c x /v( x |all) set
ds=Default|Auto|None|Max|MaxNoCache
Show virtual drive expansion
information.
MegaCli -getLdExpansionInfo
-Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL storcli /c x /v( x |all) show expansion
Expand the virtual drive within
the existing array; also use if
you replace the drives with
larger drives, beyond the size of
the existing array.
MegaCli -LdExpansion -pN
-dontExpandArray -Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL storcli /c x /v( x |all) expand Size=< value >
[expandarray]