manualshive.com logo in svg

Lenovo ThinkCentre M73 10B0, Hardware Maintenance Manual

The Lenovo ThinkCentre M73 10B0 is a high-performing desktop computer designed for efficiency and productivity. To ensure the longevity of this device, we highly recommend referring to the Hardware Maintenance Manual, which can be easily accessed and downloaded for free from manualshive.com. This comprehensive manual contains detailed instructions and guidelines for any necessary maintenance or troubleshooting tasks, enabling users to keep their ThinkCentre M73 in optimal condition.

Share
Download
background image

6. Position the new system fan on the chassis so that the three screw holes in the new system fan are

aligned with the screw posts on the thermal module. Then, install the three screws to secure the new
system fan to the computer.

Figure 200. Installing the system fan

7. Connect the cable of the new system fan to the system fan connector on the system board. See

“Locating parts on the system board” on page 87.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 235.

Replacing the thermal module

Attention:

Do not open your computer or attempt any repair before reading and understanding the

“Important safety information” on page 1.

This section provides instructions on how to replace the thermal module.

CAUTION:

The thermal module might be very hot. Before you open the computer cover, turn off the computer
and wait several minutes until the computer is cool.

To replace the thermal module, do the following:

1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect

all power cords from electrical outlets and disconnect all cables that are connected to the computer.

2. Remove the computer cover. See “Removing the computer cover” on page 207.

Chapter 11

.

Replacing FRUs (machine types: 10AX, 10AY, 10DK, 10DL, 10DM, and 10DN)

227

Summary of Contents for ThinkCentre M73 10B0

































































































































































































































































Reviews:

No comments

Related manuals for ThinkCentre M73 10B0

IBM 610 Technical Overview And Introduction preview
610
Brand: IBM Pages: 40
Korenix AnyBus-X Installation Leaflet preview
AnyBus-X
Brand: Korenix Pages: 2
Surveon EonServ 5000 Series User Manual preview
EonServ 5000 Series
Brand: Surveon Pages: 33
Supermicro SuperWorkstation 740A-T User Manual preview
SuperWorkstation 740A-T
Brand: Supermicro Pages: 138
SafeNet ProtectServer External 2 Installation Manual preview
ProtectServer External 2
Brand: SafeNet Pages: 22
Simpact Freeway 1200 Hardware Installation Manual preview
Freeway 1200
Brand: Simpact Pages: 76
StarTech.com RK1536BKF User Manual preview
RK1536BKF
Brand: StarTech.com Pages: 24
HP 2500 - Color LaserJet Laser Printer Installation Manual preview
2500 - Color LaserJet Laser Printer
Brand: HP Pages: 24
HP 2101nw User Manual preview
2101nw
Brand: HP Pages: 26
HP 4650 - Color LaserJet Laser Printer Install Manual preview
4650 - Color LaserJet Laser Printer
Brand: HP Pages: 2
HP 615N - JetDirect Print Server Setup Manual preview
615N - JetDirect Print Server
Brand: HP Pages: 56
HP 4550 - Color LaserJet Laser Printer Hardware Installation Manual preview
4550 - Color LaserJet Laser Printer
Brand: HP Pages: 32
HP 600N - JetDirect Print Server Hardware Installation Manual preview
600N - JetDirect Print Server
Brand: HP Pages: 44
HP 170X - JetDirect Print Server Hardware Installation Manual preview
170X - JetDirect Print Server
Brand: HP Pages: 30
HP 170X - JetDirect Print Server Installation And Configuration Manual preview
170X - JetDirect Print Server
Brand: HP Pages: 80
HP Appliance 4200 Manual preview
Appliance 4200
Brand: HP Pages: 116
HP 300X - JetDirect Print Server Administrator'S Manual preview
300X - JetDirect Print Server
Brand: HP Pages: 102
HP 635n Administrator'S Manual preview
635n
Brand: HP Pages: 194

Brands by name

Popular brands

Load more brands