Lenovo ThinkCentre M73 10B0 Hardware Maintenance Manual Download Page 130

Page: 130 / 256

3. Pull the Wi-Fi card module out of the mini PCI Express slot to remove it from the Wi-Fi adapter card.

Figure 55. Removing the Wi-Fi card module

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 131.

Installing the Wi-Fi units

To install the Wi-Fi units, do the following:

124

ThinkCentre M73 Hardware Maintenance Manual

Summary of Contents for ThinkCentre M73 10B0

































































































































































































































































Search results

Summary of Contents for ThinkCentre M73 10B0

Reviews:

Related manuals for ThinkCentre M73 10B0

Brands by name

Popular brands

Lenovo ThinkCentre M73 10B0, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre M73 10B0

Reviews:

Related manuals for ThinkCentre M73 10B0

Brands by name

Popular brands