manualshive.com logo in svg

Lenovo ThinkCentre M73 10B0, Hardware Maintenance Manual

The Lenovo ThinkCentre M73 10B0 is a high-performing desktop computer designed for efficiency and productivity. To ensure the longevity of this device, we highly recommend referring to the Hardware Maintenance Manual, which can be easily accessed and downloaded for free from manualshive.com. This comprehensive manual contains detailed instructions and guidelines for any necessary maintenance or troubleshooting tasks, enabling users to keep their ThinkCentre M73 in optimal condition.

Share
Download
background image

Note:

Do not let the thermal grease on the bottom of the heat sink and fan assembly get in contact

with anything.

6. Record the cable routing and connections. Then, locate the system board and disconnect all cables

connected to the system board. See “Locating parts on the system board” on page 80.

7. Lift the small handle

1

and open the retainer

2

to access the microprocessor

3

.

Figure 109. Accessing the microprocessor

8. Lift the microprocessor straight up and out of the microprocessor socket.

Notes:

• Your microprocessor and socket might look different from the one illustrated.

• Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.

• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be

kept as clean as possible.

Figure 110. Removing the microprocessor

164

ThinkCentre M73 Hardware Maintenance Manual

Summary of Contents for ThinkCentre M73 10B0

































































































































































































































































Reviews:

No comments

Related manuals for ThinkCentre M73 10B0

Obvius AcquiLite EMB Installation And Operation Manual preview
AcquiLite EMB
Brand: Obvius Pages: 29
IESC 12H-2410 User Manual preview
12H-2410
Brand: IESC Pages: 109
IBM 9123710 - eServer OpenPower 710 Introduction Manual preview
9123710 - eServer OpenPower 710
Brand: IBM Pages: 70
IBM Netfinity Series Installation Instructions Manual preview
Netfinity Series
Brand: IBM Pages: 44
DM&P Group eBOX-3800 EmbedBox User Manual preview
eBOX-3800 EmbedBox
Brand: DM&P Group Pages: 28
Multitech MultiAccess MULTIACCESS MA30120 User Manual preview
MultiAccess MULTIACCESS MA30120
Brand: Multitech Pages: 179
3onedata CP202-2CI Quick Installation Manual preview
CP202-2CI
Brand: 3onedata Pages: 3
GIGA-BYTE TECHNOLOGY E252-P31 User Manual preview
E252-P31
Brand: GIGA-BYTE TECHNOLOGY Pages: 84
Lantronix xDirect-IAP Quick Start Manual preview
xDirect-IAP
Brand: Lantronix Pages: 2
Qsan XN7016R Owner'S Manual preview
XN7016R
Brand: Qsan Pages: 65
Digitus DN-13020 User Manual preview
DN-13020
Brand: Digitus Pages: 37
4xem IPVS1A User Manual preview
IPVS1A
Brand: 4xem Pages: 103
Xerox CSX 2000 Supplementary Manual preview
CSX 2000
Brand: Xerox Pages: 20
xFusion Digital Technologies FusionServer XH321C V6 Manual preview
FusionServer XH321C V6
Brand: xFusion Digital Technologies Pages: 65
IBM Power System AC922 Installing preview
Power System AC922
Brand: IBM Pages: 138
IBM x3650 - System M2 - 7947 Product Manual preview
x3650 - System M2 - 7947
Brand: IBM Pages: 18
QNAP TS-32XU Series User Manual preview
TS-32XU Series
Brand: QNAP Pages: 55
IBM 8865 Installation Manual preview
8865
Brand: IBM Pages: 84

Brands by name

Popular brands

Load more brands