manualshive.com logo in svg

Lenovo ThinkCentre M73 10B0, Hardware Maintenance Manual

The Lenovo ThinkCentre M73 10B0 is a high-performing desktop computer designed for efficiency and productivity. To ensure the longevity of this device, we highly recommend referring to the Hardware Maintenance Manual, which can be easily accessed and downloaded for free from manualshive.com. This comprehensive manual contains detailed instructions and guidelines for any necessary maintenance or troubleshooting tasks, enabling users to keep their ThinkCentre M73 in optimal condition.

Share
Download
background image

10. Note the orientation of the new microprocessor. Hold the new microprocessor by its edges and align

the notches

1

on it with the tabs

2

in the microprocessor socket. Then, carefully lower the new

microprocessor straight down into the microprocessor socket.

Note:

The small triangle

3

on one corner of the new microprocessor is the microprocessor orientation

indicator. The new microprocessor is in the correct orientation when this indicator faces the beveled
corner

4

of the microprocessor socket.

Figure 37. Installing the microprocessor

11. Close the microprocessor retainer and lock it into position with the small handle to secure the new

microprocessor in the socket.

12. Reinstall the heat sink and fan assembly. See “Replacing the heat sink and fan assembly” on page 103.

13. Reconnect all cables that were disconnected from the system board.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 131.

Replacing the system board

Attention:

Do not open your computer or attempt any repair before reading and understanding the

“Important safety information” on page 1.

This section provides instructions on how to replace the system board.

CAUTION:

The heat sink and microprocessor might be very hot. Before you open the computer cover, turn off
the computer and wait several minutes until the computer is cool.

To replace the system board, do the following:

108

ThinkCentre M73 Hardware Maintenance Manual

Summary of Contents for ThinkCentre M73 10B0

































































































































































































































































Reviews:

No comments

Related manuals for ThinkCentre M73 10B0

Panasonic KX-NS1000 Configuration Manual preview
KX-NS1000
Brand: Panasonic Pages: 31
LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Brand: LaCie Pages: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Brand: LaCie Pages: 14
Supero SUPERSERVER 1017GR-TF User Manual preview
SUPERSERVER 1017GR-TF
Brand: Supero Pages: 100
HMS Networks Intesis IBMBSDAL0640000 User Manual preview
Intesis IBMBSDAL0640000
Brand: HMS Networks Pages: 39
PRG MBOX 2016 Hardware Manual preview
MBOX 2016
Brand: PRG Pages: 50
Sun Microsystems Sun Ray 150 User Manual preview
Sun Ray 150
Brand: Sun Microsystems Pages: 121
Planet FPS-1PW User Manual preview
FPS-1PW
Brand: Planet Pages: 87
Black Box les1208A Manual preview
les1208A
Brand: Black Box Pages: 4
Black Box LES1202A Quick Start Manual preview
LES1202A
Brand: Black Box Pages: 12
MATE iSense User Manual preview
iSense
Brand: MATE Pages: 68
NEC Express5800/140Hf User Manual preview
Express5800/140Hf
Brand: NEC Pages: 482
EEG UNEEG User Manual preview
UNEEG
Brand: EEG Pages: 32
Acnodes RMC 7132 User Manual preview
RMC 7132
Brand: Acnodes Pages: 98
GRASS VALLEY K2 TX/MAM User Manual preview
K2 TX/MAM
Brand: GRASS VALLEY Pages: 15
Lantronix SCSxx05 User Manual preview
SCSxx05
Brand: Lantronix Pages: 141
CAAS Audio DAS User Manual preview
DAS
Brand: CAAS Audio Pages: 27
Oracle Netra SPARC S7-2 Installation Manual preview
Netra SPARC S7-2
Brand: Oracle Pages: 102

Brands by name

Popular brands

Load more brands