manualshive.com logo in svg

Lenovo ThinkCentre M73 10B0, Hardware Maintenance Manual

The Lenovo ThinkCentre M73 10B0 is a high-performing desktop computer designed for efficiency and productivity. To ensure the longevity of this device, we highly recommend referring to the Hardware Maintenance Manual, which can be easily accessed and downloaded for free from manualshive.com. This comprehensive manual contains detailed instructions and guidelines for any necessary maintenance or troubleshooting tasks, enabling users to keep their ThinkCentre M73 in optimal condition.

Share
Download
background image

3. Pull the Wi-Fi card module out of the mini PCI Express slot.

Figure 123. Removing the WiFi card module

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the installation or replacement, go to “Completing the parts replacement” on page 183.

Installing the Wi-Fi units

To install the Wi-Fi units, do the following:

1. Carefully insert the Wi-Fi card module into the mini PCI Express slot at an angle of about 20 degrees.

Ensure that the Wi-Fi card module is firmly inserted and then pivot the module downward.

Figure 124. Installing the Wi-Fi card module

2. Install the two screws to secure the Wi-Fi card module to the Wi-Fi adapter card.

Chapter 10

.

Replacing FRUs (machine types: 10B4, 10B5, 10B6, 10B7, 10HL, and 10HM)

175

Summary of Contents for ThinkCentre M73 10B0

































































































































































































































































Reviews:

No comments

Related manuals for ThinkCentre M73 10B0

Acer ALTOS R910 Series Installation & Configuration Manual preview
ALTOS R910 Series
Brand: Acer Pages: 74
IBM 8832 Deployment Manual preview
8832
Brand: IBM Pages: 54
Sun Microsystems Netra t 1120 Service Manual preview
Netra t 1120
Brand: Sun Microsystems Pages: 148
TYAN YR190-B7018 Service Manual preview
YR190-B7018
Brand: TYAN Pages: 64
LaCie 301297U - 1TB Ethernet Disk XP Embedded Network Attached... Online Manual preview
301297U - 1TB Ethernet Disk XP Embedded Network Attached...
Brand: LaCie Pages: 67
Gigabyte R292-4S0 User Manual preview
R292-4S0
Brand: Gigabyte Pages: 122
Blackberry ENTERPRISE SERVER FOR NOVELL GROUPWISE Installation And Configuration Manual preview
ENTERPRISE SERVER FOR NOVELL GROUPWISE
Brand: Blackberry Pages: 73
Atos BullSequana Edge nano User Manual preview
BullSequana Edge nano
Brand: Atos Pages: 29
TRENDnet TE100-PS3 Administrator User Manual preview
TE100-PS3
Brand: TRENDnet Pages: 135
Emerson Dixell XWEB300 Installation Manual preview
Dixell XWEB300
Brand: Emerson Pages: 23
Emerson DIXELL XWEB5000 PRO Installing And Operating Instructions preview
DIXELL XWEB5000 PRO
Brand: Emerson Pages: 20
Emerson CPC ISIS Installation And Configuration Manual preview
CPC ISIS
Brand: Emerson Pages: 18
Emerson Avocent ACS 6000 User Manual preview
Avocent ACS 6000
Brand: Emerson Pages: 93
Emerson Dixell XWEB300 Operation Manual preview
Dixell XWEB300
Brand: Emerson Pages: 114
Emerson Centellis 2000 Shelf Release 3.0 Manual preview
Centellis 2000 Shelf Release 3.0
Brand: Emerson Pages: 194
Emerson ATCA-7368 Installation And Use Manual preview
ATCA-7368
Brand: Emerson Pages: 222
BRONKHORST FlowDDE Instruction Manual preview
FlowDDE
Brand: BRONKHORST Pages: 19
Fujitsu PRIMEQUEST 3800E System Configuration Manual preview
PRIMEQUEST 3800E
Brand: Fujitsu Pages: 38

Brands by name

Popular brands

Load more brands