Lenovo 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209 User Manual Download Page 52

Page: 52 / 160

Note:

You might have to remove the metal cover of the card reader drive bay.

5. Install the new card reader into the card reader bracket. Then, install the two screws to secure the

card reader to the bracket.

6. Install the card reader bracket to the chassis. Then, push the bracket to the left to align the screw hole in

the bracket with the corresponding hole in the chassis.

Figure 17. Installing the card reader

ThinkCentre User Guide

Summary of Contents for 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209

































































































































































Search results

Summary of Contents for 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209

Reviews:

Related manuals for 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209

Brands by name

Popular brands

Lenovo 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209, User Manual

Search results

Summary of Contents for 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209

Reviews:

Related manuals for 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209

Brands by name

Popular brands