10. Install the screw to secure the card reader bracket to the chassis.
Figure 22. Installing the screw that secures the card reader
11. Reconnect the card reader cable to one of the USB connectors on the system board. See “Locating
parts on the system board” on page 12.
12. Pivot the optical drive bay downward until it snaps into position.
13. Reinstall the front bezel. See “Removing and reinstalling the front bezel” on page 32.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 85.
Installing or replacing the mSATA solid state drive
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page v.
This section provides instructions on how to install or replace the mSATA solid state drive.
Note:
The mSATA solid state drive is only available in some models. For new installation, see “Installing
the mSATA solid state drive” on page 44. For replacement, see “Replacing the mSATA solid state drive”
on page 47.
Installing the mSATA solid state drive
To install the mSATA solid state drive, do the following:
44
ThinkCentre User Guide
Summary of Contents for 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209
