Lenovo 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209 User Manual Download Page 18

Page: 18 / 160

Table 2. Programs in Control Panel

Program

Control Panel section

Green text in Control Panel

Communications Utility

Hardware and Sound

Lenovo - Web Conferencing

Fingerprint Software

System and Security

Hardware and Sound

Lenovo - Fingerprint Reader

Lenovo Solution Center

System and Security

Lenovo - System Health and
Diagnostics

Password Manager

System and Security

User Accounts and Family Safety

Lenovo - Password Vault

Power Manager

Hardware and Sound

System and Security

Lenovo - Power Controls

Recovery Media

System and Security

Lenovo - Factory Recovery Disks

Rescue and Recovery

System and Security

Lenovo - Enhanced Backup and
Restore

SimpleTap

Programs

Lenovo - SimpleTap

System Update

System and Security

Lenovo - Update and Drivers

View Management Utility

System and Security

Lenovo View Management Utility

Note:

Depending on your computer model, some of the programs might not be available.

Accessing Lenovo programs on the Windows 8 operating system

If your computer is preinstalled with the Windows 8 operating system, you can access Lenovo programs by
doing either of the following:

• Click the

Lenovo Start

icon from the taskbar. A list of programs is displayed. Double-click a Lenovo

program to launch it. If a desired program is not in the list, click the plus icon +.

• Press the Windows key to go to the Start screen. Click a Lenovo program to launch it. If you cannot find

the program you need, move the pointer to the bottom-right corner of the screen to display the charms.
Then click the

Search

charm to search for the desired program.

Your computer supports the following Lenovo programs:

• Fingerprint Software

• Lenovo Companion

• Lenovo Experience

• Lenovo Solution Center

• Lenovo Start

• Lenovo Support

• Password Manager

• System Update

An introduction to Lenovo programs

This topic provides a brief introduction to some Lenovo programs.

Note:

Depending on your computer model, some of the programs might not be available.

•

Communications Utility

ThinkCentre User Guide

Summary of Contents for 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209

































































































































































Search results

Summary of Contents for 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209

Reviews:

Related manuals for 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209

Brands by name

Popular brands

Lenovo 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209, User Manual

Search results

Summary of Contents for 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209

Reviews:

Related manuals for 2934, 2941, 2945, 2961,2982, 2988, 2993, 2996, 3181, 3183, 3185, 3187, 3198, 3202, 3207,ThinkCentre 3209

Brands by name

Popular brands