Lenovo 10AX, Maintenance Manual

Page: 91 / 260

Connector Description
DisplayPort connector
Used to attach a high-performance monitor, a direct-drive monitor, or other devices
that use a DisplayPort connector.
Note: The DisplayPort connector is not applicable on some models. If your
computer has a graphics card installed, be sure to use a monitor connector on
the graphics card.
Ethernet connector Used to attach an Ethernet cable for a local area network (LAN).
Note: To operate the computer within FCC Class B limits, use a Category 5 Ethernet
cable.
Optional port Used to install a serial port or a USB 2.0 connector.
Note: If you use the optional port for installing a serial port, the serial port and the
adjacent VGA monitor connector might interfere with each other when connecting
cables. To avoid the interference, ensure that you use the serial port convert cable
that comes with the computer when you connect a device to the serial port.
USB 2.0 connector Used to attach a device that requires a USB 2.0 connection, such as a keyboard, a
mouse, a scanner, a printer, or a personal digital assistant (PDA).
USB 3.0 connector Used to attach a device that requires a USB 2.0 or 3.0 connection, such as a
keyboard, a mouse, a scanner, a printer, or a personal digital assistant (PDA). A
USB 3.0 connector provides high transmission speeds to reduce the time that is
required for data transmission.
VGA monitor connector Used to attach a VGA monitor or other devices that use a VGA monitor connector.
Note: The VGA connector is not applicable on some models. If your computer has
a graphics card installed, be sure to use a monitor connector on the graphics card.
Locating major FRUs and CRUs
Figure 13 “Component locations” on page 86 shows the locations of the various components in your
computer. To remove the computer cover, see “Removing the computer cover” on page 211.
Chapter 8
.
Locations
85