Lenovo 10AX, Maintenance Manual

Page: 245 / 260

2. Connect a new keyboard or mouse to one of the USB connectors on the computer. Depending on
where you want to connect the new keyboard or mouse, see “Locating connectors, controls, and
indicators on the front of your computer” on page 83 or “Locating connectors on the rear of your
computer” on page 84.
Figure 210. Connecting the USB keyboard or mouse
Completing the parts replacement
After completing the installation or replacement of all parts, you need to reinstall the computer cover and
reconnect cables. Depending on the parts you installed or replaced, you might need to confirm the updated
information in the Setup Utility program. Refer to Chapter 6 “Using the Setup Utility program” on page 57.
To reinstall the computer cover and reconnect cables to your computer, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer. See “Locating major FRUs and CRUs” on page 85 for the locations of various
components in your computer.
2. Before reinstalling the computer cover, ensure that the cables are routed correctly. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference with reinstalling the computer cover.
Chapter 11
.
Replacing FRUs (machine types: 10AX and 10AY)
239