Service Manual JET3
Rev. 1.0
65
3.
Remove the print head cover. Release the retaining screws with an allen key
2.5 mm (metrical) by turning about one rotation and remove the interior cover.
Attention:
It is not allowed to use ball head allen keys,
otherwise screw heads could be damaged.
4.
Release the retaining screw for the swivel-unit with an allen key SW 1.5 mm
(metrical) until you can swing the swivel -unit upwards. Arrest the retaining screw
on the final position.
5.
Press the button
<Jet Adjust>
. The nozzle seal moves automatically onto the
“service
position
”.
Summary of Contents for JET3 up
