Service Manual JET3
210
Rev. 1.0
5. For a successful activation, it is necessary that you hold the
“Service TAG” on the TAG
reader during the whole activation process. Otherwise you will get the error message:
“TAG activation failed”.
After a successful activation the new service intervals are saved and the following
message is displayed:
TAG activation
Close the dialog box with the button
<Quit>
.
Close the confirmation prompt with the
button
<Quit>.
INFORMATION
-
For a successful activation you must use a
valid
TAG.
-
You can use a Tag for a successful activation only
one
time.
-
Don`t remove the TAG during the activation process.
Otherwise the TAG could be damaged.
-
With an invalid TAG you can open the service interval dialog
box but you can`t save any values.
Summary of Contents for JET3 up
