Service Manual JET3
100
Rev. 1.0
1)
Cleaning of print head
We want to ask for your attention regarding the print head cleaning process:
Please be aware, that the print head has to be cleaned with solvent only in the front
area.
Behind the red line you must not clean with solvent.
Especially the area around the oscillator connection must not be flushed with solvent.
Otherwise solvent could penetrate inside the oscillator or the connector and could
cause damages or mal functions.
No cleaning necessary
=> No Solvent usage!!
Cleaning Area
=> Solvent can be used!!
Summary of Contents for JET3 up
