Lauda Proline RP 1290 C, Operating Instructions Manual

Page: 94 / 120

Proline Edition X cooling thermostats
94
Interfaces - Modules
YACE0100 / October 4, 2018
Command Explanation
START Switches the unit on (after Standby). See safety information (

7.7.3).
STOP Switches the unit into Standby (pump, heater, cooling unit OFF).
RMP_SELECT_X Selection of the program (1
— 5) to which the further instructions apply.
When the unit is switched on, program 5 is selected automatically.
RMP_START Start the programmer.
RMP_PAUSE Hold (pause) the programmer.
RMP_CONT Restart the programmer after pause.
RMP_STOP Terminate the program.
RMP_RESET Delete the program (all Segments).
RMP_OUT_00_XXX.XX_
XXXXX_XXX.XX_X Set a programmer segment (temperature, time, tolerance and pump level).
A segment is added and appropriate values are applied to it.
RMP_OUT_02_XXX Number of times the program runs: 0 = unlimited / 1
— 250.
 
For ”_“ use also ” ” (blank character).

Response from thermostat ”OK“ or in case of error ” ERR_X“ (RS-485 interface
e.g. “A015_OK” or in case of error ”A015_ERR_X”.).
Permitted data formats:
-XXX.XX -XXX.X -XXX. -XXX XXX.XX XXX.X XXX. XXX
-XX.XX -XX.X -XX. -XX XX.XX XX.X XX. XX
-X.XX -X.X -X. -X X.XX X.X X. X
-.XX -.X .XX .X
8.3.6 Read commands (Data requested from the thermostat)
Command Explanation
IN_PV_00 Read bath temperature (outflow temperature).
IN_PV_01 Indication of the controlled temperature (internal/ external Pt /
exteral analogue / external serial).
IN_PV_03 Read external temperature TE (Pt100).
IN_PV_04 Read external temperature TE (analogue input).
IN_PV_05 Read current bath level.
IN_PV_10 Read bath temperature (outflow temperature) in 0.001 °C.
IN_PV_13 Read external temperature TE (Pt100) in 0.001 °C.
IN_SP_00 Read temperature setpoint.
IN_SP_01 Read current pump power level
IN_SP_02 Read cooling operation mode (0 = OFF / 1 = ON / 2 = AUTOMATIC).
IN_SP_03 Read current overtemperature switch-off point.
IN_SP_04 Read current outflow temperature limit TiH.
IN_SP_05 Read current outflow temperature limit TiL.
IN_PAR_00 Read current value of Xp.
IN_PAR_01 Read current value of Tn (181 = OFF).
IN_PAR_02 Read current value of Tv.
IN_PAR_03 Read current value of Td.
IN_PAR_04 Read current value of KpE.
IN_PAR_05 Read current value of TnE (980 = OFF).