Lauda Proline RP 1290 C, Operating Instructions Manual

Page: 63 / 120

Proline Edition X cooling thermostats
YACE0100 / October 4, 2018
Starting up
63
7.10.4 Creating or modifying a program (Edit)
Here, there are the following functions:

Entry of a program.

Display of the program data of a saved program and modification of the segment data.

Insertion or appending of a new segment.

Deletion of a segment.


In addition, when a program has just been executed, new segments can be inserted
and existing ones modified, even the currently active segment. Furthermore, all
segments, except the currently active one, can be deleted at any time.

Modifications to the currently running segment are possible. The segment then
continues as though the modification had been applicable since the start of the
segment.
However: If the new segment time is shorter than the segment time that has already
run, then the program skips to the next segment.

If a segment time >999 h: 59 min is required, then this time must be shared over a
number of consecutive segments.
Entering a program: Program example (

7.10.1)
Command
Programmer Program1 Edit Modify

In the Edit menu one can Modify or
Delete a program.

Press the key.

Continue to Modify . with the key .

There is the possibility of modifying single
segments, i.e. segments can be entered
as new, changed and also deleted.
No. T end °C Time [h:m] Tolerance
Start 30.00°C ------- 3.00°C
1 30.00°C 00:30 3.00°C
Pump Menu End Insert Delete

In the "Start" line enter in the field
"T end °C" the temperature at which the
sequence is to start (default value is
30 °C). A time entry is not possible in the
"Start" segment, because the thermostat
immediately executes Segment 1 on
reaching the start temperature.

Delete single segments (rows) with
Delete .

For thermostats without cooling ability,
the setpoint temperature must be
obtainable, i.e. above the bath
temperature displayed at the time of the
program start.
Pump Menu End T
set
T
fix
Status
Edit
Loops
Graph
Info
Modify
Delete