Lauda Proline RP 1290 C, Operating Instructions Manual

Page: 50 / 120

Proline Edition X cooling thermostats
50
Starting up
YACE0100 / October 4, 2018
7.8.5 Restoring works settings
Master
dEF
If you would like to restore all the works settings except the control
parameters
P1d
and the probe calibrations
CAL
,
3x to
MNEnu
to
PArA
3x

call the works settings
dEF
.

dEF
is displayed.
3 seconds long

Press longer than 3 sec.

The changeover is acknowledged with
donE
.
or

Proceed to the next menu until
End
appears.

Press this key.
Command
Works settings

Open the device parameter menu via
the soft key Menu .

With the cursor keys continue to

Settings

Works settings .

The window shown opposite appears.

Master and then only control par.
int. is shown as a possible choice.
There are however various possibilities,
which can be selected with or :

Under All modules Master, Command
and all connected modules are reset to
the works setting with
all default .
dEF
°C
Pump Menu End T
set
T
fix
All modules
Master
Command
Cool
all default
only control par. int
only control par. ext
only miscellaneous