Lauda Proline RP 1290 C, Operating Instructions Manual

Page: 65 / 120

Proline Edition X cooling thermostats
YACE0100 / October 4, 2018
Starting up
65

A new segment is produced by moving
the cell with the black background to a
blank line with the cursor keys and then
pressing the soft key Insert . The
values of the cell located above it are
automatically copied.

If the field in the column T end °C has a
black background, the entry mode "End
of segment temperature" is obtained by
pressing the key. Depending on
the setting, that is the temperature, which
the thermostat is to achieve on the
internal or external temperature probe.

Enter the value, confirm with the
key and continue to the "Time" entry field
with .

If the field in the column Time " has a
black background, the entry mode for the
"Segment time" time setting is obtained
by pressing the key.

If 0 is entered into the field "Time", ------
appears. Then the final temperature is
approached as quickly as possible. With
a time entry the final temperature is
obtained exactly after the time expires
(ramp).

Enter the segment time and confirm with
the key.

Continue to the "Tolerance" entry field
with .

If the field in the column "Tolerance" has
a black background, the entry mode for
the "Temperature tolerance" is obtained
by pressing the key. It defines how
accurately the end of segment
temperature is to be obtained before the
next segment is processed.
A tolerance which is selected too small
can stop the next segment from being
started according to plan.

Set the temperature tolerance and
confirm with .

Continue with to the entry field
"Pump".
Help Menu Screen T
set
T
fix
6 7 8 9 0
1 2 3 4 5
Temp. tolerance (0=off):
10.
00
Min: 0.00°C Max:450.00°C
Help Menu Screen T
set
T
fix
6 7 8 9 0
1 2 3 4 5
End of segment temperature:
25.
00
Min: -150.00°C Max:450.00°C
Help Menu Screen T
set
T
fix
6 7 8 9 0
1 2 3 4 5
Input segment time:
003:00
Hours(max.999):Minutes