Lauda Proline RP 1290 C, Operating Instructions Manual

Page: 95 / 120

Proline Edition X cooling thermostats
YACE0100 / October 4, 2018
Interfaces - Modules
95
Command Explanation
IN_PAR_06 Read current value of TvE (0 = OFF).
IN_PAR_07 Read current value of TdE.
IN_PAR_09 Read current value of correction limitation
IN_PAR_10 Read current value of XpF.
IN_PAR_14 Read setpoint offset.
IN_PAR_15 Read current value of PropE.
IN_DI_01 State of contact input 1: 0 = open / 1 = closed.
IN_DI_02 State of contact input 2: 0 = open / 1 = closed.
IN_DI_03 State of contact input 3: 0 = open / 1 = closed.
IN_DO_01 State of Contact output 1:
0 = make-contact open / 1 = make-contact closed.
IN_DO_02 State of Contact output 2:
0 = make-contact open / 1 = make-contact closed.
IN_DO_03 State of Contact output 3:
0 = make-contact open / 1 = make-contact closed.
IN_MODE_00 Keyboard Master: 0 = free / 1 = inhibited.
IN_MODE_01 Control: 0 = internal / 1 = external Pt100 / 2 = external analogue /
3 = external serial
IN_MODE_02 Standby: 0 = Unit ON / 1 = Unit OFF.
IN_MODE_03 Keyboard Command: 0 = free / 1 = inhibited.
IN_MODE_04 Setpoint offset source: 0 = normal / 1=external Pt / 2 = external analogue /
3 = external serial
TYPE Read the device type
(for example “RP 845”).
VERSION_R Read software version number of control system.
VERSION_S Read software version number of protection system.
VERSION_B Read software version number of Command.
VERSION_T Read software version number of cooling system.
VERSION_A Read software version number of analogue module.
VERSION_V Read software version number of RS-232/485 module.
VERSION_D Read software version number of digital module.
VERSION_M_0 Read software version number of solenoid valve (Cooling water).
VERSION_M_1 Read software version number of solenoid valve (Automatic refill).
VERSION_M_3 Read software version number of solenoid valve (shut-off valve 1).
VERSION_M_4 Read software version number of solenoid valve (shut-off valve 2).
VERSION_M_5 Read software version number of high-temperature cooler.
STATUS Read equipment status 0 = OK, -1 = error.
STAT Read error diagnosis
Response: XXXXXXX

X = 0 no error, X = 1 error.
1. char = error
2. char = Alarm
3. char = Warning
4. char = over temperature
5. char = low-level error
6. char = high-level error (at adjustment alarm)
7. char = no external control variable