Lauda Proline RP 1290 C, Operating Instructions Manual

Page: 46 / 120

Proline Edition X cooling thermostats
46
Starting up
YACE0100 / October 4, 2018
Master
StArt
3x to
MNEnu
to
PArA
2x

Call the start option
StArt
.

The start mode can be changed here.

The display
Auto
or
MNAn
flashes.
or 
Auto
, when operation is be restored automatically again after
an interruption.

MNAn
, when the standby mode is to be activated after a mains
interruption.
Wait 4 seconds or

Display flashes 4 s

new value is automatically accepted, or

Value is immediately accepted with the Enter key.
 
When the mains voltage is restored after an interruption, standby is activated in
the
MNAn
mode and
StArt
is displayed. You can quit the standby mode
with .
Command
Auto start

Open the device parameter menu via the
soft key Menu .

With the cursor keys continue to:

Settings

Basic settings

Auto start .

On is currently active.

If the standby mode is to be activated
after a mains interruption, select "Off"
with or .

Accept the change with or End ,

or quit the window with without making
changes.
 
When the mains voltage has been restored after an interruption, you can quit
the standby mode with .
StArt
°C
Pump Menu End T
set
T
fix
Off
On
Display
Sounds Master
Sounds Command
Language
Master Mode
Autostart
Current consumpt.