Lauda PROLINE Edition X P 12 C, Operating Instructions Manual

Page: 71 / 116

Proline Edition X heating thermostats
YACE0099 / 10/9/2018
Starting up
71
7.12 Timer function
Using the timer function, the thermostat can carry out an action at a certain time or after a certain wait-
ing period. The actions are: Switching on the thermostat, entering the standby mode or one of the five
programs in the programmer.
Command
Timer 1 Timer 2

Open the device parameter menu via the
soft key Menu .

With the cursor keys continue to:

Clock

Timer 1 ,

or to Timer 2 ,

with the menu Status the selected timer
is switched off or on .
The standby key does not stop the timer!
Please exercise caution when thermostat is in standby mode! The thermostat is not
switched off safely.
A previously activated timer mode could unintentionally start the thermostat again
from the standby mode!
The menu Function is used to define when
an action is executed:

Similar to an electronic mains timer,
Week plan enables two switching
events to be carried out each day. The
cycle is repeated after 7 days.

Time absolute defines a time and a date
on which a once-only action (switching
event) occurs. The time point is set with
Set time and with Set date .

Time relative defines a waiting period
after which a once-only action occurs.
With
Set time up to 99h:59min can be
entered. ( Set date is masked out with
this function selection).

If the Week plan is activated, in this
window only Status , Function and
Week plan are displayed.
Pump Menu End T
set
T
fix
Set time
Set date
Timer 1
Timer 2
Format of date
Pump
Settings
Graph
Clock
Programmer
Interfaces
Control
Temp.Limits
Pump Menu End T
set
T
fix
Week plan
Time absolute
Time relative
Status
Function
Action
Set time
Set date