Lauda PROLINE Edition X P 12 C, Operating Instructions Manual

Page: 78 / 116

Proline Edition X heating thermostats
78
Starting up
YACE0099 / 10/9/2018
7.13.3 Internal and external control parameter sets
If a thermostat is used for a number of applications, which always leads to a change of the control pa-
rameters, these control parameters (up to 9 sets) can be saved in the thermostat and activated again as
required.
Also saving is useful for finding the best control parameters; in this way external management of the
control parameters can be avoided.
There are 9 sets (each for internal and external sets of control parameters) saved at the factory.
In this menu the control parameters cannot be edited, they are only displayed.

With Activate the currently valid control parameters are used.

With Upload actual the actual ones are read in and saved (for later reuse).

With Default the set of control parameters saved at the works is loaded again (in this case the con-
trol parameters set by the customer are lost).
Command
Control parameter sets

Open the device parameter menu via the
soft key Menu .

With the cursor keys continue to:

Control

Control Parameters

Control para. sets .

The adjacent window appears.
Set 1 to Set 9.

Select the desired set with and con-
firm with .

In the setting window (see left) the se-
lected set is listed under
intern or
extern in the display.

Under Status the previously selected
set:
is activated,
is read in and
the set, who was saved at the factory, is
restored.
Pump Menu End T
set
T
fix
Control Parameters
Control para. sets
Tv manual/auto
Correction limitation
Set 1
Set 2
Set 3
Set 4
Set 5
Set 6
Set 7
Set 8
Set 9
Pump Menu End T
set
T
fix
Status
intern
extern
Activate
Upload actual
Default