Lauda PROLINE Edition X P 12 C, Operating Instructions Manual

Page: 30 / 116

Proline Edition X heating thermostats
30
Starting up
YACE0099 / 10/9/2018
The timer continues to run. Stop as required with Pause (

7.12).
7.4 Key functions
Your Proline Thermostat is easy to operate.
7.4.1 General key functions and pilot lamps
Master
Enter key:

From the actual-value display at the main menu level,

activates input, display flashes,

saves input, display ceases to flash and menu point is left,

press for approx. 3 s: Exit function and returns to bath temperature
display.
or

Paging with keys is possible within the relevant level,
or setting of numerical values
Speeds up entry by moving the counting position to the left:
a) Keys are pressed and held down or
b) One of the two keys is pressed and held down, followed immediate-
ly by brief pressing of the other key.
Moves counting position to the right:

Switching one place to the right occurs by briefly (1 s) releasing
the key, followed by another pressing of the key.
Useful additional information:

Two dots in the Master display indicate that a submenu follows.

Three dots in the display indicate that a submenu for a module (in-
terface...) or a component (thermostat, Command remote control
....) follows. Module/component-specific possible settings are only
displayed when the hardware is connected.

The following always applies : After termination of the relevant
settings, they are accepted automatically after approx. 4 s or

the setting is accepted immediately with the Enter key.
and
 
Fault signal: Flashing red Alarm LED and acoustic signal.

An acoustic signal can only sound when it has not been intentionally
deactivated! (

7.8.6)

The bath control occurs via the external temperature probe when
the green LED is lit.

Heating is active when the yellow LED is lit.

Cooling is active. When the setpoint temperature is lowered, it
makes take up to one minute before the blue LED is lit.
EXT

The temperature of the external probe is displayed.
... °C