Lauda PROLINE Edition X P 12 C, Operating Instructions Manual

Page: 11 / 116

Proline Edition X heating thermostats
YACE0099 / 10/9/2018
Brief operating instructions
11
2 Brief operating instructions
These brief instructions shall give you the possibility to operate the unit quickly. For safe
operation of the unit, it is absolutely necessary to read carefully all the instructions and
safety notes!
1. Assemble unit and add items as appropriate (

6.1).
Take care of the hose tubing connections (

6.4 and 6.5).
2. Fill the unit with corresponding heat transfer liquid (

6.4). The units are designed for op-
eration with non-flammable and flammable liquids to DIN EN 61010-2-010.

Take care of the level of the heat transfer liquid! (

6.3).
3. Compare the information on the rating label with the supply details.
4. Connect the unit only to a socket with a protective earth (PE) connection.
5. Check whether the main fuse-switch at the back
is in the "On =
–
" position.
6. Switch the unit on with the switch at the front.
7. With set the overtemperature cut-off point to a value clearly above room temperature
(

7.14.1).
8. Now you see the current bath temperature
in the display, e.g.:
If instead, a warning or error message is displayed, then refer to Section 7.13.3.
Bath-temperature
02%32
°C