Installation
30
10. Remove Display Console from box. There are three cables
coming from the bottom of the Console: the long Upper
Wire Harness (PWM version shown), the flat ribbon cable,
and the wireless pulse cable. Club models do not have the
wireless pulse cable. (Figure 2-9).
Figure 2-9. Display Console Cables
11. Find the wire tie coming from the Upright Center Hole.
Wrap the wire tie around the Upper Wire Harness (see
Figure 2-9) and feed the connectors into the Upright Center
Hole. Pull the wire tie from the lower access hole to guide
the Upper Wire Harness through the upright and out of the
lower access hole (Figure 2-10) into the motor pan.
Upper Wire
Harness
Wireless Pulse
Cable (residential
models only)
Ribbon Cable
Guide Wire
Tie