Landice 90 Series Owner'S Manual Download

Page: 57 / 114

5. Cardio Treadmill Operation

5.1.

Cardio Control Panel

Table 5-1 Cardio Control Panel Functions

Function

Description

INCLINE

Displays the incline of the treadmill in percent (%).

SPEED

Displays the current speed of the treadbelt in MPH
(km/hr in metric mode).

Powers up the treadmill. All displays light and the treadbelt
begins moving at 0.5 mph (0.8 km/hr in metric mode). If START
is pressed while the treadmill is on it will pause the treadbelt and
statistics.

Press

STOP

once to pause the treadmill or twice to turn it off.

The statistical information is cleared when the treadmill is turned
off.

Press

ENTER

to scroll through the display screens or after any

data entry.

To manually control the speed and incline of the treadmill, press

MANUAL MODE

and adjust the speed and incline to desired

values.

Summary of Contents for 90 Series



















































































































Search results

Summary of Contents for 90 Series

Reviews:

Related manuals for 90 Series

Brands by name

Popular brands

Landice 90 Series, Owner'S Manual

Search results

Summary of Contents for 90 Series

Reviews:

Related manuals for 90 Series

Brands by name

Popular brands